Schulte Heizstab 5 Betriebsanleitung Seite 40

Turning the device on and setting heating
temperature
Briefly press the button to switch on the
device. The connection with the remote
control is automatically established. The
LED indicator shows the current setting:
- Heating switched off – LED does not light
up
- Heating switched on – LED lights up yellow
Anti-freeze function
When the device is off but still has a live
feed, and the temperature inside the room
falls down below 6° C the device will auto-
matically turn on and start heating. This
40
User manual — Heizstab 5
LED diode
on/off button
IR receiver
- Connected to remote control – LED lights
up blue
The current status (setting) is saved when
the power is disconnected and continues
when the power is restored.
function will prevent the heating medium
inside the radiator from freezing. When
this function is active every 4 seconds
a flashing orange LED diode is visible.