Intended Use; Technical Information - Schulte Heizstab 5 Betriebsanleitung

5. Ensure all necessary safety measures in
order to avoid excessive pressure inside
the radiator (allow the right space for
airbag or leave at least one of the cen-
tral heating valves open).
6. Ensure all necessary safety measures in
order to avoid excessive pressure inside
the radiator (allow the right space for
airbag or leave at least one of the cen-
tral heating valves open).

Intended use

The Heizstab 5 is an electric heating ele-
ment device intended for installation in-
side water towel radiators. The electric
radiator with the Heizstab 5 heating ele-

Technical information

Electric data: 230 V / 50 Hz
Insulation class: Class I
Casing protection class: IPx5
Heating output: 300, 600, 800 [W]
Connection types: SW — spiral cable with plug,
Radiator connection: thread G ½"
38
User manual — Heizstab 5
7. To prevent damage to the heating el-
ement, the radiator must not be filled
with liquid at a temperature > 65 °C.
8. Make sure that connection 'radiator
— heater' is tight prior to filling the
radia¬tor with heating liquid.
9. For detailed installation hints — see the
last pages of this manual.
ment installed is designed for the purpose
of drying clothes and / or towels or heat-
ing rooms.