Factory Setting Reset - Cabletech URZ0112 Bedienungsanleitung

OWNER'S MANUAL
3. Next, go to "Internet" > "Custom level" and enable options in "ActiveX
controls and plug-ins" (as shown below). Click "OK" to confirm, and then
again "OK" in Internet options" window.

9. FACTORY SETTING RESET

The reset button is hidden in the pinhole at the bottom casing of the device.
To restore the factory settings, insert a thin tool (e.g. paper clip) into the reset
pinhole and press and hold the reset button for at least 5 seconds. The camera
will restore default factory settings.
NOTE: Factory settings reset erases all data, settings and configurations saved
on the device. Factory settings reset is non-reversible.
29
EN