Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
III. DEVICE HANDLING
1. MOUNTING
1.
Use the handle provided to mount the camera. Make sure the device is
mounted properly and securely.
2.
Connect the power adapter to the power socket at the back of the device.
Connect the other plug of the power adapter into power socket.
3.
Connect the camera to router via Ethernet cable.
2. INSTALLATION
Connect your camera to router with network cable. Make sure the router and
the camera are both connected to power supply. Callibration may take up to 1
minute, wait until the process is finished.
Please note, you need to configure the settings when the IP camera and your
external device (PC, smartphone, etc.) are connected to the same network.
To obtain camera's IP address or configure settings, enter router's IP address
into URL bar to go to configuration page of your router.
3. APP
EN
Note: the app file available in the above mentioned adress and QR code is
zipped. If you are using smartphone running iOS system, you may need an
additional app for unziping the downloaded files. However, you may also
download the app directly from the App Store: go to App Store, search for
"163yun HD" app, download and install on your phone.
1.
Go to page
http://www.lechpol.eu
2.
Enter this product's site and go to "Files"
("Pliki") to download the app.
3.
Select the appropriate version that corresponds
to your external device (Android, iOS, PC).
4.
Download the installation file.
5.
Run the installation process.
6.
Open the app once the installation is completed.
20
OWNER'S MANUAL
Werbung
Inhaltsverzeichnis
