Cabletech URZ0112 Bedienungsanleitung Seite 27

OWNER'S MANUAL
7. WIRELESS CONNECTION BETWEEN IP CAMERA AND
ROUTER
You can use this IP camera wirelessly connected to your router. To set your camera:
1. Enter browser access to the camera (enter camera IP into URL box of
your browser).
2. Click tool button to enter Settings.
3. Go to Network Set > Wireless LAN settings > input your router data (make
sure the SSID and shared-key of the router are entered correctly) and
click "Submit".
4. The IP camera will need to reboot. Wait for the process to complete and
disconnect the network cable from IP camera.
5. The camera will be connected to your router wirelessly.
NOTE: after setting up the IP camera to be connected to your router wirelessly,
the camera is assigned new IP address. Please, keep that in mind in relation to
browser access to the camera!
8. REMOTE CONTROL OF IP CAMERA
In network operations, software installation is realized by the IE browser of the
operating system itself, which is simple and convenient. The DVR supports LAN
and WAN access, as well as IP and domain name access.
NOTE: The camera allows for its remote control and management with the
use of smartphone, tablet or computer with Internet Explorer browser.
Please, keep in mind that configuration of the devices for such use
requires additional knowledge and setting up.
Internet Explorer browser settings
27
EN