Schubert 10006325 Bedienungsanleitung Seite 24

Touch
By the function of touch response, you can control the touch of fingers of playing the keyboard to allow dynamic variation of
volume. Press [TOUCH] button to switch touch function of the keyboard. There are three touch types for choice altogether.
1. Press [TOUCH] button to open touch res-
ponse and LCD displays the symbol.
2. Press [TOUCH] button, do the loop operati-
on in this four status: 001/002/003/OFF.
Reverb
Press the [REVERB] button, the reverb effect
closed, there was no symbol that displayed on the
LCD, Press this button again, The LCD displayed the
symbol was opened.
Chorus
Press [CHORUS] button to open default chorus
effect and CHORUS LCD displays the symbol.
Press [CHORUS] button again, the chord sym-
bol fade from the LCD, the chord function close.
Metronome
1. Press the [METRONOME] button to start the
metronome sound of the metronome.
2. Press the [FUNCTION MENU ]button to select
(04 Beat Num.),then adjust the metronome
number by the +/- button
3. You can specify the metronome number of
every subsection in the range 0,2,3 9
4. The metronome function closed if you press
the [METRONOME] button again.
Transposition
Press TRANPOSE"+/-"button, the correspon-
ding musical scale goes up or goes down for one
note when you play the black and white keys,
you can adjust the musical scale for +12 levels
upwards and downwards. The transpose was ef-
fect only in the normal performance status ,the
system will restore to the default value if you
press the transpose+/- buttons at the same time.
24