Herunterladen Inhalt Inhalt Diese Seite drucken

TriStar KA - 5016 Bedienungsanleitung Seite 14

Vorschau ausblenden Andere Handbücher für KA - 5016:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
Before use, check if the electrical supply in your house is identical to the voltage of this
appliance (230V)
1, Please check the place where the unit will be used as a high temperature will be set in
the front of the unit. Make sure there is nothing flammable or easy to deform object within 1
meter in front of the unit. About 0.5 m in back of the unit . Never use the appliance in places
where there are flammable and explosives or powder. Do not use on wet place to prevent
electrical shock.
2, If the unit is used on an unequal place, the security falser switch is not in the right position
and the appliance will not work. So make sure to use the unit in a plain place.
3, The power cord should be in the back of the body frame. Check the cord and the plug
regularly; if these are damaged, the appliance should not be used but be repaired first by a
qualified person.
4, Children, old people and persons with poor knowledge of electricity should not use this
appliance unattended.
5, During the use, especially in the beginning and at the end of using period, a click may
occur: this is the expansion and contraction sound of a heated object, it does not mean
malfunction.
6, Do not use this appliance outdoors.
V. IMPORTANT SAFEGUARD
1, Never use the unit in a place that is not plain.
2, Do not use the unit when you are asleep and keep the unit far away from articles such as
textile, bedding etc to avoid a fire accident.
3, Never touch the protector on the front to avoid burn when the unit works.
4, While cleaning, be sure not to splash water. Do not clean or wipe with a wet cloth as
these may cause short circuit or electrical shock when water flows into the unit.
5, Do not use this heater in the immediate surrounding of a bath, a shower or a swimming
pool.
6, Do not use this heater with a thermal control, a programmer controller, a timer or any
other device that switches the heater on automatically.
7, Do not cover the appliance: if the appliance is covered, there is a fire risk.
8, In case the power cord or plug is damaged or any other part of heater is damaged, be
sure to stop using it at once. Send it for repair to an authorized technician.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis