Ports And Buttons - Asus WL-HDD2.5 Handbuch

Hardware Components
This section gives you a tour of the different ports and status indicators of
the ASUS Wireless "WL-HDD". Refer to this section when installing and
operating your device.

Ports and Buttons

1
Power Connector: Connect the power adapter here.
2
USB Port: Insert a USB flash disk here.
3
LAN Port: Connect one end of the RJ-45 Ethernet cable here and the other end to the RJ-45 port
of a network hub, switch, or router.
4 Reset Button: Press this button for 5 seconds to shut down the ASUS Wireless "WL-HDD".
Press this button for 30 seconds to reset the ASUS Wireless "WL-HDD".
Status Indicators
LED Status
1
Green Blinking
2
Yellow Blinking
3 POWER On
Blinking (slow)
4
USB Off
Blinking (fast)
Blinking (slow)
On
5 WLAN On
Blinking
6
HDD Off
Blinking
2
1
2
Indication
Data is being transferred with a speed of 10Mbps
Data is being transferred with a speed of 100Mbps
Power adapter is plugged in and the device is powered on
File system on the hard disk drive is inconsistent
No USB device found
Copying from the USB device to the hard disk drive
Partition 1 of the hard disk drive is full
USB device found
Normal state
Wireless packets are being transmitted or received
Normal state
Hard disk drive is being accessed
ASUS Wireless "WL-HDD" Quick Start
4
3
3 4
1 2
5 6