Specifications - Makita DGD800 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Button
1-2. Red indicator
1-3. Battery cartridge
2-1. Star marking
3-1. Indicator lamps
3-2. CHECK button

SPECIFICATIONS

Max. wheel point diameter
Max. mandrel (shank) length
No load speed (n
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for grinding ferrous materials or
deburring castings.
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Model DGD800
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DGD801
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
Explanation of general view
4-1. Slide switch
5-1. Indication lamp
6-1. Wrench 13
6-2. Wheel point
6-3. Collet nut
6-4. Wrench 13
Model
Collet capacity
) / Rated speed (n)
0
Overall length
Net weight
Rated voltage
noise level determined
) : 72 dB (A)
pA
value (tri-axial vector
2
) : 6.5 m/s
h,SG
2
2
) : 2.5 m/s or less
h,SG
2
DGD800
402 mm
2.0 kg
ENE050-1
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
ENG905-1
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENG900-1
sum)
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Die Grinder
Model No./ Type: DGD800, DGD801
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
ENG901-1
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
3
9-1. Limit mark
10-1. Holder cap cover
10-2. Screwdriver
11-1. Brush holder cap
11-2. Screwdriver
DGD801
6 mm or 6.35 mm (1/4")
36 mm
46 mm
-1
26,000 (min )
307 mm
1.7 kg
D.C. 18 V
ENH101-18