System Settings - LENCO CR-630BK Bedienungsanleitung

Selecting the modes
When the radio is turned on, press the Mode button repeatedly to switch between DAB + and FM
modes.
DAB+ operation
When you first select DAB+ radio, press and hold Scan button it will search for and store all available
DAB+ stations.Once Auto search is completed, your radio will select the first station tuned.
Selecting between stations. With your radio on:
Press the Mode button to select DAB+ mode.
Press the Prev or Next button to navigate through the list of stations.
Press Enter button to tune to the station currently shown on the display.
You may adjust volume by pressing Vol+ or Vol- button.
FM operation
With your radio on, press the Mode button to select FM mode.
Press the Prev or Next button to manually tune to specific frequencies by 0.05MHz per step.
The radio also includes the scan feature of FM, allowing you to automatically tune to FM stations.
Press and hold the Next button to automatically search for the next available radio station. When a
station is found it will be automatically played.
You can search for stations in the opposite direction by pressing and holding the Prev button.
Storing stations as presets
Radio can store 10 stations as presets in both DAB+ and FM mode. To store a preset:
Tune to the station you like, press and hold the Preset button.Display indicate Preset <xx: (Empty)>,
now with Prev or Next button to select desired preset for store.
Press the Enter button to store the station.The message "Preset xx stored" will appear on the display.
Recall stations saved as presets
To recall a preset station:
Select the band (DAB+ or FM) of the station by pressing the Mode button.
Press the Preset button to recall the preset station, then using the Prev or Next button to browse
through your presets and press the Enter button to confirm.
Setting the time automatically
When you first turn on the radio it will automatically synchronise to the local time while searching
for DAB+ stations. If the time hasn't set itself try to change the location of the device for a better
signal.

System Settings

With the unit on, press and hold the Info/Menu button.This will open the "Set Menu".
Press the Prev or Next button to select your desired Sub-option.
7