LENCO CR-630BK Bedienungsanleitung Seite 10

Retuning your DAB+/FM Radio
You can retune your radio stations to store new stations or tune to a new region. Your preset stations
will remain stored when you perform a full scan retune. In DAB mode:
Press and hold the Scan button to perform a full scan.
Progress will be indicated on the display.
When tuning is complete, the radio will play the first listed station or return to the last station played.
Using the Headphones
You can listen to your DAB+/FM radio using headphones, just plug the 3.5mm jack into the back of
your device in the headphone jack. Control the volume by using the Vol+ or Vol-.
FAQs
Problem
No Power
No sound
Poor reception
Function disturbed
Specifications
Frequency rangs
Output connector
Aerial
Power supply adaptor (For EU only)
Manufacture
Input
Output
Mode Number
Use only original AC adaptor
Use only the power supply listed on the user
instructions
Guarantee
Lenco offers service and warranty in accordance with the European law, which means that in case of
repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the
warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of
the manufacturer will be voided.
Solution
Check that the system is connected to a working mains outlet.
Check that the DC power adaptor is properly connected to the DC in on the
radio.
Check that the volume control is not at minimum setting.
Adjust the location of the antenna for best signal reception.
If none of the above solution work, try unplugging your Radio.
FM 87.5-108MHz
DAB 174-240MHz
3.5mm earphone socket
Telescopic antenna
Shenzhen Adition Audio Science &Technology
Co.Ltd
AC 100-240V~50/60Hz,0.5A Max
DC 5V/2A
AD12A0502000EU
10