Werbung
43LED/509
1 Zonen Funkfernbedienung
Feature
für Effekte (Helligkeit, Festfarbe und
43LED/509 and its receiver is a single zone RF wireless RGB controller. 1 remote SR-2808 can control an
endless number of receivers synchronously. All receivers will share the same ID address, can also work with
Farbwechsel)
power repeater to expand output unlimitedly.
Parameter
mit Synchronisationsfunktion
Remote
Part No.
Reichweite bis 20m
43LED/509
L 136,5/B 40/H 11,5mm
Receiver
Part No.
verwendbar mit 43LED/501
43LED/500
43LED/501
Lieferung inklusive Batterie CR2025
Product Size
BestellNr.
43LED/509
RF RGB controller
43LED/528-W & 43LED/528-S
5
Feature
43LED/528
43LED/528 are RF controllers for RGB color lighting. Each white can achieve 256 levels
brightness adjustment. Key part can be uninstall every easily to change battery and frames from other factory.
1 Zonen
RGB
Funkcontroller für
Receivers work with WIFI-RF convertor to be controlled by smart phone.
Parameter
Remote
Wandeinbau
Operation
Operation Voltage
Part No.
Remarks
Frequency
43LED/528-W
3VDC
434MHz/868MHz
RF Wireless
Glasabdeckung in zwei Farben/Bat-
43LED/528-S
3VDC
434MHz/868MHz
RF Wireless
Receiver
Part No.
Iuput Voltage
Current
Output
teriebetrieb
43LED/520
12-36VDC
4x8A
4x(96-288)W
Constant voltage
43LED/521
12-36VDC
4x350mA
4x(4.2-12.6)W
Constant current
für Einbau in Schalterdosen 68mm
Installation
Helligkeit und Festfarben (kein
Farbwechsel)
mit Synchronisationsfunktion
86 x 86/AL 26/ET 20mm
Lieferung inklusive Batterie CR2032
BestellNr.
Farbauswahl angeben
43LED/528- W
S
43LED/528-
43LED/527-4
4 ZONEN WIRELESS RGBW CONTROLLER
für Gleichspannung oder Gleichstrom
verwendbar mit Empfänger 43LED/520 oder 43LED/521
Patent
Feature
Unique design-square color pad
Sensitive full touch new technology
Special glass interface(white&black)
Control 4 zones seperately or synchronously
Save 1 color/mode for each zone
5
Parameter
Remote
43LED/5274
Operation
DIMENSIONS
Part No.
Operation Voltage
Remarks
Frequency
ø/h (mm)
Touch Sensor
43LED/527-4
100-240VAC
868MHz
86x86x29.1
Receiver
4 Zonen
RGB
oder RGBW Funkcon-
Input Voltage
Part No.
Output Current
Output Power
Remarks
43LED/520
12-36VDC
4x8A
4x(96-288)W
Constant voltage
troller für Wandeinbau
4x350mA
4x(4.2-12.6)W
Constant current
43LED/521
12-36VDC
Product Size
Glasabdeckung schwarz/Eingangs-
86.0
spannung 230V
für Einbau in Schalterdosen 68mm
für Effekte (Helligkeit, Festfarbe und
Farbwechsel)
Bedienungsanleitungen und Schaltdiagramme finden Sie
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
mit Synchronisationsfunktion
86 x 86/AL 10/ET 20mm
BestellNr.
43LED/527-4
FUNKSTEUERUNGEN FÜR RGB + RGBW
One Zone RF Wireless LED RGB Controller
Model:43LED/509
+
43LED/501
RGB
RGB
3 Kanal Empfänger
für Funkfernbedienung 43LED/509
Eingangsspannung 12-24VDC, 3x 5A
L 178/B 47/H 20mm
DIMENSIONS
Operation
Operation Voltage
Frequency
ø/h (mm)
3VDC
434MHz/868MHz
39x136.5x10.7
BestellNr.
Iuput Voltage
Current
Output
43LED/501
12-36VDC
3x5A
3x(60-180)W
12-36VDC
3x350mA
3x(4.2-12.6)W
136.5
43LED/520 & 43LED/521
4 KANAL EMPFÄNGER FÜR RGBW CONTROLLER WIRELESS
Wiring diagram
Gleichspannungsbetrieb
Power Supply
110V-230VAC
12-36VDC
43LED/521
Learning Key
LED CONTROLLER
+
Power Supply
AC110-230V
12-36VDC
V+
V+
R-
V-
CH1
43LED/520
Learning
G-
Switch
LED CONTROLLER
2
B-
B-
3
3
W-
4
Operation
a.Learning
Press shortly the learning Key
on the receiver, then push the rotary button .Once successfully learn, the LED
43LED/520
lights will blink on the receiver. Do the same for the other receivers if you use them, you can add as many
optional receivers as you want
b.Operation
-Short push rotary button to switch ON/OFF
RGB
oder RGBW 4 Kanal Empfänger
Feature
-Adjust dim brightness by the rotary button from left to right 1-100%
-Adjust dim brightness by the rotary button from right to left 100-1%
Work with different sender
für Funkfernbedienung 43LED/529
-Long press rotary button, the light will be 100% brightness
Work with WIFI transmitter
-Double click rotary button, it will change color of RGB light. Double click again, will enter into dimming
Control RGBW, RGB, CC-CW, Single color LED lighting.
brightness mode
Eingangsspannung 12-24VDC, 4x 8A
Parameter
Safety & Warnings
1) The product shall be installed and serviced by a qualified person.
Input Voltage
Part No.
Output Current
Output Power
Remarks
L 170/B 57/H 29mm
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
4x8A
4x(96-288)W
43LED/520
enclosure.
12-36VDC
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
43LED/521
12-36VDC
4x350mA
4x(4.2-12.6)W
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product
Product Size
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
BestellNr.
before switching on.
178.9
6)
Please ensure that the cable is secured tightly in the connector
43LED/520
7) For update information please consult your supplier.
170.4
Brief introduction of buttons
Learning to sender
12-36VDC power input
or connect next DALI dimmer
43LED/521
LED CONTROLLER
Learning Key
Short circuit for master.
Open circuit for slave.
Bedienungsanleitungen und Schaltdiagramme finden Sie
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
43LED/520 & 43LED/521
Wiring diagram
1)Sender
Connection
Diagram
4 KANAL EMPFÄNGER FÜR RGBW CONTROLLER WIRELESS
Gleichspannungsbetrieb
43LED/527-4
L
N
+
L
AC240V/110V
N
2)
Receiver
Connection Diagram for Multiple Units
Power Supply
110V-230VAC
12-36VDC
43LED/521
LED Light
LED CONTROLLER
Learning Key
43LED/521
LED Light
LED CONTROLLER
Learning Key
43LED/520
43LED/521
LED Light
RGB
oder RGBW 4 Kanal Empfänger
Feature
Learning Key
LED CONTROLLER
Work with different sender
Installation
für Funkfernbedienung 43LED/529
Work with WIFI transmitter
Control RGBW, RGB, CC-CW, Single color LED lighting.
Parameter
Eingangsspannung 12-24VDC, 4x 8A
Input Voltage
Part No.
Output Current
Output Power
L 170/B 57/H 29mm
4x8A
4x(96-288)W
43LED/520
12-36VDC
43LED/521
12-36VDC
4x350mA
4x(4.2-12.6)W
Product Size
BestellNr.
178.9
43LED/520
Bedienungsanleitungen und Schaltdiagramme finden Sie
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
170.4
Brief introduction of buttons
Learning to sender
12-36VDC power input
or connect next DALI dimmer
43LED/521
Learning Key
LED CONTROLLER
Short circuit for master.
Open circuit for slave.
Bedienungsanleitungen und Schaltdiagramme finden Sie
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
KONSTANTSPANNUNG 12-24VDC
Wiring diagram
1)Receiver Connection Diagram for Single Unit
Power Supply
110V-230VAC
12-36VDC
43LED/500
RF RGB Controller
Learning Key
2)
Receiver
Connection Diagram for Multiple Units
Power Supply
110V-230VAC
12-36VDC
43LED/500
RF RGB Controller
Learning Key
43LED/500
RF RGB Controller
Learning Key
43LED/529
4 Zonen Funkfernbedienung
43LED/500
Learning Key
RF RGB Controller
oder RGBW
Operation
für Effekte (Helligkeit, Festfarbe und
After you have wired all the receivers according to Figure illustration you need to do the following:
Farbwechsel)
1. Pull off the plastic film cover of the battery at the back of remote.
2. Master receiver learning: short press the Learning Key on the receiver, and then immediately press the
REMARKS
.Once you do that, the LED lights will blink once.
mit Synchronisationsfunktion
Slave receiver learning: short press the Learning Key on the receiver, and then immediately press the any
RF Wireless
button on the remote except
.
Reichweite bis 20m
After master and slave learning, please Long Press
Remarks
L 120/B 55/H 17mm
Why should there be 2 methods of learning?
Constant voltage
When one remote is being used to control multiple receivers that are working together simultaneously after
Constant current
some time in operation they may lose synchronously. The receiver which is done the master learning will
verwendbar mit 43LED/520
synchronize all slave receivers automatically.
Notice: there can be only one master receiver, all the others be slave receivers.
Lieferung exklusive 3x Batterien AAA
Button Instructions:
: short press to turn ON/OFF; long press for 3 seconds to reset.
BestellNr.
: 10 built-in dynamic color changing modes; short press to get a dynamic mode, press again to pause to
have a static color, press again to get a next dynamic mode.....
43LED/529
43LED/527-1
1 ZONEN WIRELESS RGBW CONTROLLER
Wiring diagram
für Gleichspannung oder Gleichstrom
verwendbar mit Empfänger 43LED/520 oder 43LED/521
Power Supply
12-36VDC
Patent
43LED/521
LED CONTROLLER
Learning Key
RGB/W or CDW LED strip
Feature
Unique Design- Square color pad
Power Supply
Sensitive Full Touch New Technology
12-36VDC
Special Glass Interface(white&black)
Control 1 zone synchronously
Save 1 color/scene for each zone
V+
V-
43LED/520
RGB/W or CDW LED strip
Learning
Switch
LED CONTROLLER
Parameter
Operation
Remote
Operation
43LED/5271
Part No.
Operation Voltage
Learning (matching)
Frequency
43LED/527-1
100-240VAC
a. Do wiring according to connection diagram
868MHz
b. Wake up the remote control by touching ON/OFF button.
Receiver
c. Press learning button on receiver.
1 Zonen
Input Voltage
RGB
oder RGBW Funkcon-
Part No.
Output Current
d. Touch any zone button on remote control.
43LED/520
12-36VDC
4x8A
e. Then touch color wheel.
4x350mA
43LED/521
12-36VDC
f. Connected LED light will blink to confirm zone designation.
troller für Wandeinbau
Product Size
g. Press at learning button on receiver over 5 seconds until LED light flash, then delete the learned ID.
86.0
Note 1: To choose a master from slaves by jumper for each zone.
Glasabdeckung schwarz/Eingangs-
Short circuit for master.
Open circuit for slave.
Each zone only can set one master controller. After a period of time, the master will do synchronization
Remarks
spannung 230V
operation to keep the same color or mode of all slaves in one zone.
Constant voltage
Note 2: Each remote control 8 zones (areas) receivers, each area can be learned as many receivers as
Constant current
für Einbau in Schalterdosen 68mm
we can.
Each receiver maximally can be controlled by 8 different remote controllers.
Safety & Warnings
für Effekte (Helligkeit, Festfarbe und
1) The product shall be installed and serviced by a qualified person.
Bedienungsanleitungen und Schaltdiagramme finden Sie
Farbwechsel)
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
mit Synchronisationsfunktion
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
86 x 86/AL 10/ET 20mm
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
Please ensure that the cable is secured tightly in the connector
BestellNr.
7) For update information please consult your supplier.
For LED lighting
43LED/527-1
(RGB/CCT/Single color
LED light)
Bedienungsanleitungen und Schaltdiagramme finden Sie
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
Wiring diagram
Power Supply
12-36VDC
43LED/521
LED CONTROLLER
Learning Key
Power Supply
12-36VDC
V+
V-
43LED/520
Learning
Switch
LED CONTROLLER
Operation
43LED/80
Learning (matching)
a. Do wiring according to connection diagram
b. Wake up the remote control by touching ON/OFF button.
c. Press learning button on receiver.
manuelles
RGB
Kontrollmodul
d. Touch any zone button on remote control.
e. Then touch color wheel.
f. Connected LED light will blink to confirm zone designation.
Eingangsspannung 12 oder 24VDC,
g. Press at learning button on receiver over 5 seconds until LED light flash, then delete the learned ID.
Note 1: To choose a master from slaves by jumper for each zone.
max 8A
Short circuit for master.
Open circuit for slave.
Each zone only can set one master controller. After a period of time, the master will do synchronization
Remarks
mit Memoryfunktion
operation to keep the same color or mode of all slaves in one zone.
Constant voltage
Note 2: Each remote control 8 zones (areas) receivers, each area can be learned as many receivers as
Constant current
we can.
9 vorprogrammierte Sequenzen
Each receiver maximally can be controlled by 8 different remote controllers.
Safety & Warnings
L 115/B 75/H 35mm
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
BestellNr.
für Betrieb
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
43LED/80-12
12V
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
43LED/80-24
24V
6)
Please ensure that the cable is secured tightly in the connector
7) For update information please consult your supplier.
For LED lighting
(RGB/CCT/Single color
LED light)
Bedienungsanleitungen und Schaltdiagramme finden Sie
Technische Datenbläter und Detailinfos - www.leuchtwurm.at/downloads
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
43LED/520 & 43LED/521
4 KANAL EMPFÄNGER FÜR RGBW CONTROLLER WIRELESS
Gleichspannungsbetrieb
+
43LED/520
RGB
RGB
oder RGBW 4 Kanal Empfänger
Feature
Work with different sender
für Funkfernbedienung 43LED/529
Work with WIFI transmitter
Control RGBW, RGB, CC-CW, Single color LED lighting.
Eingangsspannung 12-24VDC, 4x 8A
Parameter
Input Voltage
Part No.
Output Current
L 170/B 57/H 29mm
43LED/520
12-36VDC
43LED/521
12-36VDC
Product Size
BestellNr.
for 3 seconds to reset. (necessory)
178.9
43LED/520
170.4
Brief introduction of buttons
Learning to sender
12-36VDC power input
or connect next DALI dimmer
Wiring diagram
Learning Key
Short circuit for master.
43LED/520 & 43LED/521
1)Sender
Connection
Diagram
Open circuit for slave.
4 KANAL EMPFÄNGER FÜR RGBW CONTROLLER WIRELESS
Bedienungsanleitungen und Schaltdiagramme finden Sie
Gleichspannungsbetrieb
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
110V-230VAC
43LED/527-1
L
N
LED light
L
110V-230VAC
N
2)
Receiver
Connection Diagram for Multiple Units
+
Power Supply
110V-230VAC
12-36VDC
AC110-230V
43LED/521
LED CONTROLLER
Learning Key
V+
R-
CH1
G-
5
2
B-
B-
RGB/W or CDW LED strip
43LED/521
3
3
LED CONTROLLER
W-
Learning Key
4
DIMENSIONS
43LED/520
Remarks
ø/h (mm)
Touch Sensor
86x86x29.1
43LED/521
Learning Key
LED CONTROLLER
RGB
oder RGBW 4 Kanal Empfänger
Output Power
Remarks
Feature
4x(96-288)W
Constant voltage
Installation
Constant current
4x(4.2-12.6)W
Work with different sender
für Funkfernbedienung 43LED/529
Work with WIFI transmitter
Control RGBW, RGB, CC-CW, Single color LED lighting.
Eingangsspannung 12-24VDC, 4x 8A
Parameter
Input Voltage
Part No.
Output Current
L 170/B 57/H 29mm
43LED/520
12-36VDC
43LED/521
12-36VDC
Product Size
BestellNr.
178.9
43LED/520
Bedienungsanleitungen und Schaltdiagramme finden Sie
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
170.4
Brief introduction of buttons
Learning to sender
12-36VDC power input
or connect next DALI dimmer
Learning Key
Short circuit for master.
Open circuit for slave.
Bedienungsanleitungen und Schaltdiagramme finden Sie
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
110V-230VAC
LED light
AC110-230V
V+
R-
CH1
G-
2
RGB/W or CDW LED strip
B-
B-
3
3
W-
4
43LED/83
RGB-Signalverstärker
L 107/B 65/H 35mm
BestellNr.
für Betrieb
43LED/83-12
12V
43LED/83-24
24V
Wiring
Operati
Learnin
a. Do wir
b. Wake
c. Press
d. Touch
e. Then t
f. Conne
g. Press
Note 1: T
Short ci
Open ci
Each zo
Output Power
Remarks
operatio
4x8A
4x(96-288)W
Constant voltage
Note 2: E
4x350mA
4x(4.2-12.6)W
Constant current
we can.
Each rec
Safety &
1) The pr
2) IP20.P
enclosur
3) Alway
4) Pleas
product.
5) Never
before s
6)
Pleas
7) For up
43LED/521
For LED lighting
LED CONTROLLER
(RGB/CCT/Single color
Wiring
LED light)
LED Light
LED Light
Operati
Learnin
a. Do wir
LED Light
b. Wake
c. Press
d. Touch
e. Then t
f. Conne
g. Press
Note 1: T
Short ci
Open ci
Each zo
Output Power
Remarks
operatio
4x8A
4x(96-288)W
Constant voltage
Note 2: E
4x350mA
4x(4.2-12.6)W
Constant current
we can.
Each rec
Safety &
1) The pr
2) IP20.P
enclosur
3) Alway
4) Pleas
product.
5) Never
before s
6)
Pleas
7) For up
43LED/521
For LED lighting
LED CONTROLLER
(RGB/CCT/Single color
LED light)
Werbung
