Werbung
43LED/410
mit Universaldimmer
dimmbares Netzteil für
Konstantspannung
Prim. 220-240VAC
Sec. 24VDC 100W
dimmbar mit LEDtauglichem RLC
L 301/B 64/H 40mm
BestellNr.
43LED/410
LED MONOCHROME DIMMER 12VDC 24VDC
für KONSTANTSPANNUNG
0/1-10V dimmer
Model: 43LED/580
43LED/530
Dimmmodul - 1 Kanal
Feature
dimmbar mit Taster oder
With 1 Channel 0/1-10V signal Input, 1 Channel PWM Output
Analog dim driver, receive standard 1-10V dim signal input
0-100% dimming range via logarithmic characteristic , perfect for human's vision
Funkfernbedienung
256 levels of Grey scales, smoothly without any flash
To work with power repeater to expand output unlimitedly.
Can coordinate with 1-10 regulator or 1-10V dimmer to do analog dimming ,smooth dimming curve,
be in direct proportion to voltage curve of regular.
Eingangsspannung 12-24VDC, 1x 8A
Parameter
Part No.
Iuput Voltage
Current
Output
Remarks
L 95/B 37/H 20mm
43LED/580
12-36VDC
1x8A
1x(96-288)W
Constant voltage
Brief introduction of buttons
BestellNr.
Output
1 channel 0/1-10V
43LED/580
signal input
43LED/530
Power input 12-36VDC
0/1-10V dimmer
Model: 43LED/580
43LED/580
Dimmmodul - 1 Kanal
Feature
dimmbar mit 1-10V Dimmer
With 1 Channel 0/1-10V signal Input, 1 Channel PWM Output
Analog dim driver, receive standard 1-10V dim signal input
0-100% dimming range via logarithmic characteristic , perfect for human's vision
Eingangsspannung 12-24VDC, 1x 8A
256 levels of Grey scales, smoothly without any flash
To work with power repeater to expand output unlimitedly.
Can coordinate with 1-10 regulator or 1-10V dimmer to do analog dimming ,smooth dimming curve,
be in direct proportion to voltage curve of regular.
L 95/B 37/H 20mm
Parameter
Part No.
Iuput Voltage
Current
Output
Remarks
43LED/580
12-36VDC
1x8A
1x(96-288)W
Constant voltage
BestellNr.
Brief introduction of buttons
43LED/580
Output
1 channel 0/1-10V
43LED/580
signal input
Power input 12-36VDC
UNIVERSAL LED NETZTEILE DIMMBAR
43LED/411
DALI & TouchDIM
dimmbares Netzteil für
Konstantspannung
Prim. 220-240VAC
Sec. 24VDC 100W
L 301/B 64/H 40mm
BestellNr.
43LED/411
Product Size
95.0
Five Zone RF Wireless LED Dimmer
Model:43LED/539
85.0
Wiring diagram
43LED/580
Single Color LED Strip
0/1-10V
Control Unit
Power Supply
AC110-230V
Input 12-36VDC
Safety & Warnings
43LED/539
1) The product shall be installed and serviced by a qualified person.
Feature
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
Reliable stable switch and dimming control function,control range≥20M.
5 Zonenfunkfernbedienung
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
Battery in the remote is with long life span. It normally can use for 2 years.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
Switch on/off of lightings slowly, without any flash, meet the comfort of human eyes.
product.
Dimming range 0.1-100%.
zum Schalten und stufenlosen
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
Use with power repeater to expand the output power unlimitedly.
before switching on.
Enable to control 5 zones separately, each zone can be set endless receivers, each receiver.
6)
Please ensure that the cable is secured tightly in the connector
Dimmen 0-100%
maximally be controlled by 8 different remotes.
7) For update information please consult your supplier.
Enable be dimmed and ON/OFF by push button after connecting receivers.
Warranty Agreement
Receivers can work with RF-WIFI converter after installing software on IOS and Android system.
1) We provide lifelong technical assistance with this product:
Reichweite bis 20m
Push dim function
3-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
Product introduction
For faults beyond the 3-year warranty we reserve the right to charge for time and parts.
L 136,5/B 39/H 11mm
The 43LED/539 and its receiver is a 5 Zone RF Wireless LED Dimmer. It lets you individually control up to five
different zones independently or in a group.
2) Limited Warrenty
Any defects caused by wrong operation.
Lieferung inklusive Batterien und
Parameter
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Remote
Any damages due to transportation, vibration etc. after purchase.
Operation
DIMENSIONS
Part No.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Wandhalterung
Operation Voltage
ø/h (mm)
Frequency
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
43LED/539
3VDC
434MHz/868MHz
39x136.5x10.7
harmful chemicals.
Product has been updated
Receiver
Part No.
Iuput Voltage
Current
Output
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
BestellNr.
43LED/531
12-36VDC
4x700mA
4x(8.4-25.2)W
43LED/530
12-36VDC
1x8A
1x(96-288)W
43LED/539
Product Size
Product Size
95.0
DALI dimmer(Push dim)
136.5
Model:43LED/582
85.0
Wiring diagram
43LED/580
Single Color LED Strip
0/1-10V
Control Unit
Power Supply
AC110-230V
Input 12-36VDC
Safety & Warnings
43LED/582
1) The product shall be installed and serviced by a qualified person.
Feature
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
Match all DALI system in the market
Dimmmodul - 4 Kanal
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
Manual /automatically DALI address setting
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
DALI address digital indicate
product.
Four channels with same address,4 CH work synchronously
DALI dimmbar mit TouchDIM Funktion
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
Push dimmer/DALI dimmer optional
before switching on.
Parameter
6)
Please ensure that the cable is secured tightly in the connector
Eingangsspannung 12-24VDC, 4x 5A
7) For update information please consult your supplier.
Part No.
Iuput Voltage
Current
Output
Warranty Agreement
4x5A
4x(60-180)W
43LED/582
12-36VDC
1) We provide lifelong technical assistance with this product:
alle 4 Kanäle laufen synchron
Product Size
3-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 3-year warranty we reserve the right to charge for time and parts.
178.9
L 179/B 45/H 18mm
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
BestellNr.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
170.4
harmful chemicals.
Brief introduction of buttons
43LED/582
Product has been updated
DALI addresses indicate
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
12-36VDC power input
or connect next DALI dimmer
43LED/582
DALI signal input or connect to
next DALI dimmer
DALI addresses adjust button
43LED/190
1-10V DIM & SwitchDIM
dimmbares Netzteil für
Konstantspannung
Prim. 220-240VAC
Sec. 24VDC 75W
L 220/B 58/H 42mm
BestellNr.
43LED/190
Wiring diagram
Power Supply
110V-230VAC
12-36VDC
43LED/531
Learning Key
RF Easy Dimmer
GND
4x5A
PUSH
GND
43LED/530
PUSH
RF Easy Dimmer
Learning Key
Power Supply
110V-230VAC
12-36VDC
Operation
After you have wired all the receivers according to Figure illustration you need to do the following:
1. Pull off the plastic film cover of the battery at the back of remote.
2. If you use multiple receivers, you have 2 choices:
Have all receivers in the same zone like Zone 1 for example or
Have each receiver in a different zone, like Zone 1, 2, 3 and so on
3. In order for each receiver to know what Zone it belongs to, you will need to "pair" it to the zone you wish to
use: short press the Learning Key on the receiver, then immediately short press the
you wish to use (for example ON/Off from zone 1). Once you do that, the LED lights will blink once. Now your
remote and receiver are paired!
4. Do the same for the other receivers if you use them.
This wireless receiver can work in any of the 5 zones. It has a special "Learning Key" that is in the unit that will
enable you to pair it to any of the 5 zones in the wireless remote control. You can add as many optional
receivers as you wish, to create up to 5 different control zones. Each zone can have an endless number of
receivers, which will let you escalate any installation from small to super-size.
Memory Reset:
In case you want to reset the memory of the receiver, press the learning function button for 10 seconds while
the unit is being powered. The unit will then reset to factory defaults.
Remarks
Re-Assign Zone:
Re assigning the receiver to a different zone is easy, just repeat Step 3 as above.
Constant current
Constant voltage
Wiring diagram
1)Connection Diagram for Single Unit
PCBA Mini Dimmer
Power Supply
110V-230VAC
12-36VDC
Model: 43LED/589
43LED/582
DALI Master
Power Supply
110-230VAC
110V-230VAC
12-36VDC
43LED/582
Push dimmer
43LED/589
2)Connection Diagram for Multiple Units
Feature
43LED/589 is mini touch sensor dimmer&switch, well matched LED aluminum profiles to use.
Power Supply
110V-230VAC
12-36VDC
Minidimmer für Einbau in Profile
Low cost and high stability
Parameter
ohne Gehäuse
43LED/582
Part No.
Iuput Voltage
Current
Output
DALI Master
durch Berührung dimmbar!
Remarks
43LED/589
12-24VDC
1x3A
1x(36-72)W
43LED/582
Constant voltage
Eingangsspannung 12-24VDC, 1x 3A
Product Size
L 42/B 10/H 10mm
42 mm
43LED/582
BestellNr.
43LED/589
Operation
Setting DALI address
a. Manual:Long press any button---digital address will flicker---short press button to set address we want----
Brief introduction of buttons
long press any button to confirm.
b. DALI master setting: 101.566 can also be setting address by all DALI masters which possess this function.
For LED lighting
V+
The specific operation can refer to DALI master manual.
V-
c. Once an address is selected, all four channels address will be same. For example, if the decoder is
addressed to 22 on the display then CH1 – 22, CH2 – 22, CH3 –22, CH4 – 22.
Wiring diagram
Technische Datenbläter und Detailinfos - www.leuchtwurm.at/downloads
N
Power Supply
110-230VAC input
12-24VDC
L
V+
12-24VDC input
V-
KONSTANTSPANNUNG
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
or
from the zone
Installation attention
(1) Put mini sensor dimmer switch into profiles when power is off.
(2) When install it in high humidity places (for example, bathroom / kitchen), pl
Single color LED Strip
Single color LED Strip
your LED profile is isolated against water. Otherwise it will affect the sensitivit
Single color LED Strip
(3) Pay attention to polarity. Reverse polarity will destroy the module.
Single color LED Strip
(4) To prevent the cover from being scratched, it's better to use a white hard pa
above of spring. Then install it. Below is the picture for reference:
Single color LED Strip
Single color LED Strip
Single color LED Strip
Single color LED Strip
Safety & Warnings
1) The product shall be installed and serviced by a qualified person.
Single color LED Strip
Single color LED Strip
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensur
Single color LED Strip
Remark 1
Remark 2
enclosure.
Single color LED Strip
3) Always be sure to mount this unit in an area with proper ventilation to avoid
Mini touch sensor
Constant Voltage
dimmer & switch,
Single color LED Strip
4) Please check if the output voltage of any LED power supplies used comply w
for aluminum profile
Single color LED Strip
product.
Single color LED Strip
Single color LED Strip
5) Never connect any cables while power is on and always assure correct conn
before switching on.
6)
Please ensure that the cable is secured tightly in the connector
7) For update information please consult your supplier.
Warranty Agreement
Single color LED Strip
Single color LED Strip
Single color LED Strip
1) We provide lifelong technical assistance with this product:
Single color LED Strip
3-year warranty. We print date on every products, for example :1125 means
warranty is for free repair or replacement and covers manufacturing faults onl
For faults beyond the 3-year warranty we reserve the right to charge for tim
2) Limited Warrenty
LED+
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, in
LED-
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnorma
Any damages caused by negligence, inappropriate storing at high tempera
harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive rem
W
W
Short pre
Long pre
long pres
Werbung
