Werbung
FUNKSTEUERUNGEN für
KONSTANTSTROM
43LED/509
1 Zonen Funkfernbedienung
Feature
43LED/509 and its receiver is a single zone RF wireless RGB controller. 1 remote SR-2808 can control an
für Effekte (Helligkeit, Festfarbe und
endless number of receivers synchronously. All receivers will share the same ID address, can also work with
power repeater to expand output unlimitedly.
Farbwechsel)
Parameter
Remote
mit Synchronisationsfunktion
Part No.
Reichweite bis 20m
43LED/509
Receiver
L 136,5/B 40/H 11,5mm
Part No.
43LED/500
verwendbar mit 43LED/500
43LED/501
Product Size
Lieferung inklusive Batterie C2025
BestellNr.
43LED/509
RF RGB controller
43LED/528-W & 43LED/528-S
5
Feature
43LED/528
43LED/528 are RF controllers for RGB color lighting. Each white can achieve 256 levels
brightness adjustment. Key part can be uninstall every easily to change battery and frames from other factory.
1 Zonen
RGB
Funkcontroller für
Receivers work with WIFI-RF convertor to be controlled by smart phone.
Parameter
Remote
Wandeinbau
Operation
Operation Voltage
Part No.
Remarks
Frequency
43LED/528-W
3VDC
434MHz/868MHz
RF Wireless
Glasabdeckung in zwei Farben/Bat-
43LED/528-S
3VDC
434MHz/868MHz
RF Wireless
Receiver
Part No.
Iuput Voltage
Current
Output
teriebetrieb
43LED/520
12-36VDC
4x8A
4x(96-288)W
Constant voltage
43LED/521
12-36VDC
4x350mA
4x(4.2-12.6)W
Constant current
für Einbau in Schalterdosen 68mm
Installation
Helligkeit und Festfarben (kein
Farbwechsel)
mit Synchronisationsfunktion
86 x 86/AL 26/ET 20mm
Lieferung inklusive Batterie CR 2032
BestellNr.
Farbauswahl angeben
43LED/528- W
S
43LED/528-
43LED/527-4
4 ZONEN WIRELESS RGBW CONTROLLER
für Gleichspannung oder Gleichstrom
verwendbar mit Empfänger 43LED/520 oder 43LED/521
Patent
Feature
Unique design-square color pad
Sensitive full touch new technology
Special glass interface(white&black)
Control 4 zones seperately or synchronously
Save 1 color/mode for each zone
5
Parameter
43LED/5274
Remote
Operation
DIMENSIONS
Part No.
Operation Voltage
Remarks
Frequency
ø/h (mm)
43LED/527-4
100-240VAC
868MHz
86x86x29.1
Touch Sensor
Receiver
4 Zonen
RGB
oder RGBW Funkcon-
Part No.
Input Voltage
Output Current
Output Power
Remarks
4x8A
4x(96-288)W
43LED/520
12-36VDC
Constant voltage
troller für Wandeinbau
43LED/521
12-36VDC
4x350mA
4x(4.2-12.6)W
Constant current
Product Size
Glasabdeckung schwarz/Eingangs-
86.0
spannung 230V
für Einbau in Schalterdosen 68mm
für Effekte (Helligkeit, Festfarbe und
Farbwechsel)
Bedienungsanleitungen und Schaltdiagramme finden Sie
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
mit Synchronisationsfunktion
86 x 86/AL 10/ET 20mm
BestellNr.
43LED/527-4
STEUERUNGEN FÜR RGB UND RGBW
One Zone RF Wireless LED RGB Controller
Model:43LED/509
RGB
und RGBW LEDANWENDUNGEN
+
43LED/500
RGB
RGB
3 Kanal Empfänger
für Funkfernbedienung 43LED/509
Eingangsspannung 12-24VDC,
3x 350mA
DIMENSIONS
Operation
Operation Voltage
Frequency
ø/h (mm)
3VDC
L 178/B 47/H 20mm
434MHz/868MHz
39x136.5x10.7
Iuput Voltage
Current
Output
3x5A
12-36VDC
3x(60-180)W
BestellNr.
12-36VDC
3x350mA
3x(4.2-12.6)W
43LED/500
136.5
Receiver for RGBW Remote & Wifi transmitter
Model: 43LED/520 & 43LED/521
Wiring diagram
Power Supply
110V-230VAC
12-36VDC
43LED/521
Learning Key
LED CONTROLLER
+
Power Supply
AC110-230V
12-36VDC
V+
V+
R-
V-
CH1
43LED/520
Learning
G-
Switch
LED CONTROLLER
2
B-
B-
3
3
W-
4
Operation
a.Learning
Press shortly the learning Key
on the receiver, then push the rotary button .Once successfully learn, the LED
43LED/521
lights will blink on the receiver. Do the same for the other receivers if you use them, you can add as many
optional receivers as you want
b.Operation
RGB
-Short push rotary button to switch ON/OFF
oder RGBW 4 Kanal Empfänger
-Adjust dim brightness by the rotary button from left to right 1-100%
Feature
-Adjust dim brightness by the rotary button from right to left 100-1%
für Funkfernbedienung 43LED/528
-Long press rotary button, the light will be 100% brightness
Work with different sender
-Double click rotary button, it will change color of RGB light. Double click again, will enter into dimming
Work with WIFI transmitter
brightness mode
Control RGBW, RGB, CC-CW, Single color LED lighting.
Eingangsspannung 12-24VDC, 3x
Safety & Warnings
Parameter
1) The product shall be installed and serviced by a qualified person.
Remarks
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
350mA
Part No.
Iuput Voltage
Current
enclosure.
43LED/520
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
12-36VDC
4x8A
L 179/B 46/H 19mm
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
43LED/521
12-36VDC
4x350mA
product
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
Product Size
before switching on.
6)
Please ensure that the cable is secured tightly in the connector
178.9
BestellNr.
7) For update information please consult your supplier.
43LED/521
170.4
Brief introduction of buttons
Learning to sender
12-36VDC power input
or connect next DALI dimmer
43LED/521
Learning Key
LED CONTROLLER
Short circuit for master.
Open circuit for slave.
Wiring diagram
Receiver for RGBW Remote & Wifi transmitter
1)Sender
Connection
Diagram
Model: 43LED/520 & 43LED/521
43LED/527-4
L
N
L
AC240V/110V
+
N
2)
Receiver
Connection Diagram for Multiple Units
Power Supply
110V-230VAC
12-36VDC
43LED/521
LED Light
Learning Key
LED CONTROLLER
43LED/521
LED Light
Learning Key
LED CONTROLLER
43LED/521
43LED/521
LED Light
RGB
oder RGBW 4 Kanal Empfänger
LED CONTROLLER
Learning Key
Feature
Installation
für Funkfernbedienung 43LED/527-4
Work with different sender
Work with WIFI transmitter
Control RGBW, RGB, CC-CW, Single color LED lighting.
Eingangsspannung 12-24VDC, 3x
Parameter
350mA
Part No.
Iuput Voltage
Current
43LED/520
12-36VDC
4x8A
L 179/B 46/H 19mm
43LED/521
12-36VDC
4x350mA
Product Size
178.9
BestellNr.
Bedienungsanleitungen und Schaltdiagramme finden Sie
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
43LED/521
170.4
Brief introduction of buttons
Learning to sender
12-36VDC power input
or connect next DALI dimmer
43LED/521
Learning Key
LED CONTROLLER
Short circuit for master.
Open circuit for slave.
Wiring diagram
1)Receiver Connection Diagram for Single Unit
Power Supply
110V-230VAC
12-36VDC
43LED/500
RF RGB Controller
Learning Key
2)
Receiver
Connection Diagram for Multiple Units
Power Supply
110V-230VAC
12-36VDC
43LED/500
RF RGB Controller
Learning Key
43LED/500
RF RGB Controller
Learning Key
43LED/529
4 Zonen Funkfernbedienung
43LED/500
RF RGB Controller
Learning Key
oder RGBW
Operation
für Effekte (Helligkeit, Festfarbe und
After you have wired all the receivers according to Figure illustration you need to do the following:
1. Pull off the plastic film cover of the battery at the back of remote.
Farbwechsel)
2. Master receiver learning: short press the Learning Key on the receiver, and then immediately press the
REMARKS
.Once you do that, the LED lights will blink once.
Slave receiver learning: short press the Learning Key on the receiver, and then immediately press the any
RF Wireless
mit Synchronisationsfunktion
button on the remote except
.
After master and slave learning, please Long Press
Reichweite bis 20m
Remarks
Why should there be 2 methods of learning?
Constant voltage
L 120/B 55/H 17mm
When one remote is being used to control multiple receivers that are working together simultaneously after
Constant current
some time in operation they may lose synchronously. The receiver which is done the master learning will
synchronize all slave receivers automatically.
verwendbar mit 43LED/521
Notice: there can be only one master receiver, all the others be slave receivers.
Lieferung exklusive 3x Batterien AAA
Button Instructions:
: short press to turn ON/OFF; long press for 3 seconds to reset.
: 10 built-in dynamic color changing modes; short press to get a dynamic mode, press again to pause to
BestellNr.
have a static color, press again to get a next dynamic mode.....
43LED/529
43LED/527-1
1 ZONEN WIRELESS RGBW CONTROLLER
Wiring diagram
für Gleichspannung oder Gleichstrom
verwendbar mit Empfänger 43LED/520 oder 43LED/521
Power Supply
12-36VDC
Patent
43LED/521
LED CONTROLLER
Learning Key
RGB/W or CDW LED strip
Feature
Unique Design- Square color pad
Sensitive Full Touch New Technology
Power Supply
Special Glass Interface(white&black)
12-36VDC
Control 1 zone synchronously
Save 1 color/scene for each zone
V+
RGB/W or CDW LED strip
V-
43LED/520
Learning
Switch
LED CONTROLLER
Parameter
Remote
Operation
Operation
43LED/5271
Part No.
Operation Voltage
Frequency
Learning (matching)
43LED/527-1
100-240VAC
868MHz
a. Do wiring according to connection diagram
Receiver
b. Wake up the remote control by touching ON/OFF button.
1 Zonen
Input Voltage
RGB
oder RGBW Funkcon-
Part No.
Output Current
c. Press learning button on receiver.
43LED/520
12-36VDC
4x8A
d. Touch any zone button on remote control.
4x350mA
43LED/521
12-36VDC
e. Then touch color wheel.
troller für Wandeinbau
Product Size
f. Connected LED light will blink to confirm zone designation.
86.0
g. Press at learning button on receiver over 5 seconds until LED light flash, then delete the learned ID.
Glasabdeckung schwarz/Eingangs-
Note 1: To choose a master from slaves by jumper for each zone.
Short circuit for master.
Open circuit for slave.
spannung 230V
Output
Remarks
Each zone only can set one master controller. After a period of time, the master will do synchronization
operation to keep the same color or mode of all slaves in one zone.
4x(96-288)W
Constant voltage
für Einbau in Schalterdosen 68mm
Note 2: Each remote control 8 zones (areas) receivers, each area can be learned as many receivers as
4x(4.2-12.6)W
Constant current
we can.
Each receiver maximally can be controlled by 8 different remote controllers.
für Effekte (Helligkeit, Festfarbe und
Safety & Warnings
Bedienungsanleitungen und Schaltdiagramme finden Sie
1) The product shall be installed and serviced by a qualified person.
Farbwechsel)
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
mit Synchronisationsfunktion
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
86 x 86/AL 10/ET 20mm
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
BestellNr.
6)
Please ensure that the cable is secured tightly in the connector
7) For update information please consult your supplier.
43LED/527-1
For LED lighting
(RGB/CCT/Single color
LED light)
WIFI FUNK STEUERUNG für
LEDANWENDUNGEN
Wiring diagram
KONSTANTSTROM
Power Supply
12-36VDC
43LED/526
WIFI CONTROLLER
für Gleichspannung oder Gleichstrom
verwendbar mit Empfänger 43LED/520 oder 43LED/521
43LED/521
LED CONTROLLER
Learning Key
Power Supply
12-36VDC
V+
V-
43LED/520
Learning
Switch
LED CONTROLLER
Feature
43LED/526 is a convertor which works with Surnicher's receiver 43LED/520 series to be controlled by
IOS or Android system via WIFI. IOS and Android application is similar, we will use IOS as an example in this
Operation
manual.
Parameter
43LED/526
Learning (matching)
Operation Voltage
Output
Operation frequency
Part No.
43LED/526
12-24VDC
a. Do wiring according to connection diagram
RF Signal
2.4G
Brief introduction of buttons
b. Wake up the remote control by touching ON/OFF button.
WIFI
RGB
oder RGBW Funkcontroller
c. Press learning button on receiver.
d. Touch any zone button on remote control.
ANT1
43LED/526
e. Then touch color wheel.
zur Ansteuerung mit Mobiltelefon
f. Connected LED light will blink to confirm zone designation.
Short press to learn to controller
g. Press at learning button on receiver over 5 seconds until LED light flash, then delete the learned ID.
(12-24VDC)
Long press to delete controller
Configure &
Reset button
oder Tablet
Tx
Note 1: To choose a master from slaves by jumper for each zone.
ANT2
Link
Short circuit for master.
Ready
Open circuit for slave.
Reichweite bis 20m
Bedienungsanleitungen und Schaltdiagramme finden Sie
Each zone only can set one master controller. After a period of time, the master will do synchronization
Output
Remarks
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
operation to keep the same color or mode of all slaves in one zone.
4x(96-288)W
Constant voltage
Eingangsspannung 12-24VDC
Note 2: Each remote control 8 zones (areas) receivers, each area can be learned as many receivers as
4x(4.2-12.6)W
Constant current
we can.
Each receiver maximally can be controlled by 8 different remote controllers.
L 99/B 50/H 20mm
Safety & Warnings
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
BestellNr.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
43LED/526
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
Please ensure that the cable is secured tightly in the connector
7) For update information please consult your supplier.
Technische Datenbläter und Detailinfos - www.leuchtwurm.at/downloads
For LED lighting
(RGB/CCT/Single color
LED light)
KONSTANTSTROM
Receiver for RGBW Remote & Wifi transmitter
Model: 43LED/520 & 43LED/521
+
43LED/521
RGB
RGB
oder RGBW 4 Kanal Empfänger
Feature
für Funkfernbedienung 43LED/529
Work with different sender
Work with WIFI transmitter
Control RGBW, RGB, CC-CW, Single color LED lighting.
Eingangsspannung 12-24VDC,
Parameter
3x 350mA
Iuput Voltage
Part No.
43LED/520
12-36VDC
L 179/B 46/H 19mm
43LED/521
12-36VDC
for 3 seconds to reset. (necessory)
Product Size
178.9
BestellNr.
43LED/521
170.4
Brief introduction of buttons
Learning to sender
12-36VDC power input
or connect next DALI dimmer
Wiring diagram
1)Sender
Connection
Receiver for RGBW Remote & Wifi transmitter
Diagram
Short circuit for master.
Model: 43LED/520 & 43LED/521
Open circuit for slave.
110V-230VAC
43LED/527-1
L
N
L
110V-230VAC
N
2)
Receiver
Connection Diagram for Multiple Units
RGB/W or CDW LED strip
+
Power Supply
110V-230VAC
12-36VDC
AC110-230V
43LED/521
LED CONTROLLER
Learning Key
V+
R-
CH1
5
G-
2
43LED/521
B-
B-
RGB/W or CDW LED strip
LED CONTROLLER
Learning Key
3
3
W-
4
DIMENSIONS
43LED/521
Remarks
ø/h (mm)
Touch Sensor
86x86x29.1
43LED/521
Learning Key
LED CONTROLLER
RGB
oder RGBW 4 Kanal Empfänger
Output Power
Remarks
4x(96-288)W
Constant voltage
Feature
Installation
Constant current
4x(4.2-12.6)W
für Funkfernbedienung 43LED/527-1
Work with different sender
Work with WIFI transmitter
Control RGBW, RGB, CC-CW, Single color LED lighting.
Eingangsspannung 12-24VDC, 3x
Parameter
350mA
Part No.
Iuput Voltage
43LED/520
12-36VDC
L 179/B 46/H 19mm
43LED/521
12-36VDC
Product Size
178.9
BestellNr.
Bedienungsanleitungen und Schaltdiagramme finden Sie
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
43LED/521
170.4
Brief introduction of buttons
Learning to sender
12-36VDC power input
or connect next DALI dimmer
Short circuit for master.
Open circuit for slave.
RGB
und RGBW
Receiver for RGBW Remote & Wifi transmitter
Model: 43LED/520 & 43LED/521
110V-230VAC
Wiring diagram
ANT1
43LED/526
(12-24VDC)
Configure &
Reset button
Power Supply
Tx
12-24VDC
ANT2
Link
RGB/W or CDW LED strip
+
Ready
N
L
110V-230VAC
AC110-230V
Safety & Warnings
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
V+
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
R-
product.
CH1
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
G-
2
before switching on.
B-
B-
RGB/W or CDW LED strip
6)
Please ensure that the cable is secured tightly in the connector
3
3
7) For update information please consult your supplier.
W-
4
Warranty Agreement
1) We provide lifelong technical assistance with this product:
3-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
43LED/521
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 3-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
RGB
oder RGBW 4 Kanal Empfänger
Any damages due to transportation, vibration etc. after purchase.
Feature
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated
für Funkfernbedienung 43LED/527-4
Work with different sender
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Work with WIFI transmitter
Control RGBW, RGB, CC-CW, Single color LED lighting.
Eingangsspannung 12-24VDC, 3x
Parameter
350mA
Bedienungsanleitungen und Schaltdiagramme finden Sie
Part No.
Iuput Voltage
unter www.leuchtwurm.at mittels Suche der jeweiligen Artikelnummer.
43LED/520
12-36VDC
L 179/B 46/H 19mm
43LED/521
12-36VDC
Product Size
178.9
BestellNr.
43LED/521
170.4
Brief introduction of buttons
Learning to sender
12-36VDC power input
or connect next DALI dimmer
Short circuit for master.
Open circuit for slave.
Wirin
Opera
Learn
a. Do
b. Wa
c. Pre
d. Tou
e. The
f. Con
g. Pre
Note 1
Short
Open
Each
Current
Output
Remarks
opera
4x8A
4x(96-288)W
Constant voltage
Note 2
4x350mA
Constant current
4x(4.2-12.6)W
we ca
Each
Safety
1) The
2) IP2
enclos
3) Alw
4) Ple
produ
5) Nev
before
6)
Ple
7) For
43LED/521
For LED lighting
Wirin
LED CONTROLLER
Learning Key
(RGB/CCT/Single color
LED light)
LED Light
LED Light
Opera
Learn
a. Do
LED Light
b. Wa
c. Pre
d. Tou
e. The
f. Con
g. Pre
Note 1
Short
Open
Current
Output
Remarks
Each
opera
4x8A
4x(96-288)W
Constant voltage
Note 2
4x350mA
4x(4.2-12.6)W
Constant current
we ca
Each
Safety
1) The
2) IP2
enclos
3) Alw
4) Ple
produ
5) Nev
before
6)
Ple
7) For
43LED/521
For LED lighting
Learning Key
LED CONTROLLER
(RGB/CCT/Single color
LED light)
Wirin
Opera
Learn
a. Do
b. Wa
c. Pre
d. Tou
e. The
f. Con
g. Pre
Note
Short
Open
Each
Current
Output
Remarks
opera
4x8A
4x(96-288)W
Constant voltage
Note
4x350mA
4x(4.2-12.6)W
Constant current
we ca
Each
Safety
1) The
2) IP2
enclo
3) Alw
4) Ple
produ
5) Ne
before
6)
Ple
7) For
43LED/521
For LED lighting
Learning Key
LED CONTROLLER
(RGB/CCT/Single color
LED light)
Werbung
