Time Display; Starting The Programme - V-ZUG Adorina S Bedienungsanleitung

• AquaPlus
This function enables the machine to make another rinsing in addition to the one already made after
the main wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the
minimal detergent remnants on the laundry can be reduced.
• Easy iron
This function creases the clothes lesser when they are being washed. Drum movement is reduced
and spin speed is limited to prevent creasing. In addition, washing is done with a higher water level.

Time display

Remaining time for the completion of the programme while it is running is displayed as "01:30" in
hours and minutes format.
C
Programme time may differ from the values in the "Programme and consumption table" depending on the water
pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary
functions selected and the changes at the mains voltage.
6.9 End Time
With the End Time function, the startup of the programme may be delayed up to 24 hours. After
pressing End Time button, the programme's estimated ending time is displayed. If the End Time is
adjusted, End Time indicator is illuminated.
In order for the End Time function is activated and the programme is completed at the end of the
specified time, you must press Start / Pause button after adjusting the time.
If you want to cancel End Time function, press On / Off button to turn off and on the machine.
C
Do not use liquid detergents when you activate End Time function! There is the risk of staining of the clothes.
1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3 Set the end time of your choice by pressing the End Time button. End Time indicator illuminates.
4 Press Start / Pause button. Time countdown starts. ":" sign in the middle of the end time on the
display starts flashing.
C
Additional laundry may be loaded during the End Time countdown period. At the end of the countdown, End Time
indicator turns off, washing cycle starts and the time of the selected programme appears on the display.
When the End Time selection is completed, the time appears on the screen consists of end time plus the duration
of the selected programme.

1.10 Starting the programme

1 Press Start / Pause button to start the programme.
2 The Start / Pause button which was off before starts to illuminate steadily now, indicating that
the programme has started.
104 / EN
88
0 C
88:88
1888
88
C
0
88:88
1888
88
C
0
88:88
1888
Washing Machine / Operating instructions