Power Switch - Omron BF511 Gebrauchsanweisung

HBF-511_main.book 7 ページ ２０１２年２月３日 金曜日 午前１０時４０分
Changing the Personal Data
1.
Turn on the power.
"CAL" blinks on the display, then the display
changes to "0.0 kg".
Wait until "0.0 kg" appears on the display.
2.
Press the Personal Profile Number
button to select your personal profile
number.
1)
Your number flashes one time on the
display.
2)
Press the SET
button to
confirm.
Then the
selected age
setting blinks
on the display.
Deleting the Personal Data
1.
Turn on the power.
"CAL" blinks on the display, then the display
changes to "0.0 kg".
Wait until "0.0 kg" appears on the display.
2.
Press the Personal Profile Number
button to select your personal profile
number.
1)
Your number flashes one time on the
display.
2)
Press the SET
button to
confirm.
Then the
selected age
setting blinks
on the display.

Power Switch

The power will automatically switch off in the following conditions:
1. If the monitor is not used within one minute of "0.0 kg" appearing on the display.
2. If no information is entered for 5 minutes when entering personal data.
3. If the monitor is not used for 5 minutes after the measurement results are displayed.
4. Five (5) minutes after the result is displayed when measuring weight only.
3.Setting and Storing Personal Data
3.
With the or button, modify the
selected item, followed by pressing
SET button. The display will change
in order of age, gender and height.
3.
Delete the personal data.
Press the Personal
Profile Number
button for more than
two seconds.
"Clr" will appear on
the display and the personal data are deleted
from memory.
EN
7