Safety Warnings - Märklin 37492 Bedienungsanleitung

Function
• Possible operating systems:
6646/6647 Märklin Transformer, Märklin Delta,
Märklin Digital, Märklin Systems.
• Recognition of the mode of operation: automatic.
• Addresses that can be set (Control Unit): 01– 80.
Address set at the factory: 48.
• Mfx technology for the Mobile Station /
Central Station. Name set at factory: GG1 4911
• Adjustable acceleration/braking (ABV).
• Adjustable maximum speed.
• Setting the locomotive parameters electronically
with the Control Unit, Mobile Station or
Central Station.
• Built-in sound effects circuit, can only be used in
operation with the Control Unit or Märklin Systems.
Additional sound effects that can be controlled.
• This train is designed for operation on Märklin
H0 M, K or C tracks with a minimum radius of
360 mm. Recommended minimum radius: 450
mm / 17-11/16.
The maintenance work necessary with normal ope-
ration of this locomotive is described below.Please
see your authorized Märklin dealer for repairs or
spare parts.
6
No warranty or damage claims shall be accepted in those cases
where parts neither manufactured nor approved by Märklin have
been installed in Märklin products or where Märklin products have
been converted in such a way that the non-Märklin parts or the
conversion were causal to the defects and / or damage arising. The
burden of presenting evidence and the burden of proof thereof,
that the installation of non-Märklin parts or the conversion in or of
Märklin products was not causal to the defects and / or damage
arising, is borne by the person and / or company responsible for
the installation and / or conversion, or by the customer.

Safety Warnings

• T
his locomotive is to be used only with an operating
system designed for it (Märklin 6646/6647 AC transfor-
mer, Märklin Delta, Märklin Digital or Märklin Systems).
Under no circumstances should transformers rated
for an input of 220 volts be connected to the Ame-
rican 110 volt household current system.
• The feeder track must be equipped to prevent
interference with radio and television reception,
when the locomotive is to be run in conventional
operation. The 74046 interference suppression set
is to be used for this purpose. The interference
suppression set is not suitable for digital operation.
• This locomotive must never be supplied with power
from more than one transformer.
• Pay close attention to the safety warnings in the
instructions for your operating system.