Safety Warnings - Märklin BR 101 Bedienungsanleitung

G Maximum speed and acceleration / braking delay
can be changed (braking delay works only with
Märklin Delta or Digital).
Headlights that change over with the direction of
G
travel can be turned on / off in digital operation or
in operation with the Delta-Control 4 f (Nr. 66045).
The headlights will vary in brightness with the speed
of the locomotive when the latter is operated
with AC power. The headlights are off at all
times when the locomotive is operated with the
6604 Delta-Control. The headlights are on at all
times when the locomotive is operated with the
6607 Delta-Station.
Only in Digital operation with
the 6021 Control-Unit:
G Canceling of the acceleration/braking delay that
has been set for the locomotive.
G Front and rear head lamps can be switched on
independently of each other.
Maintenance procedures that become necessary
with normal operation of the locomotive are des-
cribed below. Please see your authorized Märklin
dealer for repairs or spare parts.
8
No warranty or damage claims shall be accepted in
those cases where parts neither manufactured nor
approved by Märklin have been installed in Märklin
products or where Märklin products have been
converted in such a way that the non-Märklin parts
or the conversion were causal to the defects and / or
damage arising. The burden of presenting evidence
and the burden of proof thereof, that the installation
of non-Märklin parts or the conversion in or of Märklin
products was not causal to the defects and / or
damage arising, is borne by the person and / or
company responsible for the installation and / or
conversion, or by the customer.

Safety Warnings

G This locomotive is to be used only with an operating
system designed for it (Märklin 6646/6647
AC transformer, Märklin Delta or Märklin Digital).
G This locomotive must never be supplied with
power from more than one transformer.
G Pay close attention to the safety warnings in the
instructions for your operating system.