Axis M1145 Installationsanleitung Seite 11

LED Indicators
Note
• The Status LED can be configured to be unlit during normal
operation. To configure, go to Setup > System Options > Ports
& Devices > LED. See the online help for more information.
• The Status LED can be configured to flash while an event is
active.
• The Status LED can be configured to flash for identifying the
unit. Go to Setup > System Options > Maintenance .
Status LED
Green
Amber
Red
Note
The Network LED can be disabled so that it does not flash when
there is network traffic. To configure, go to Setup > System
Options > Ports & Devices > LED. See the online help for more
information.
Network LED
Green
AXIS M1145 Series
Indication
Steady green for normal operation.
Steady during startup. Flashes
when restoring settings.
Flashes red for firmware upgrade
failure.
Indication
Steady for connection to a 1 Gbit/s
network. Flashes for network
activity.
11