Serial Numbers; Cleaning And Maintenance - Peg Perego Book Gebrauchsanleitung

wheels.
To remove the rear wheels: pull the pivot outwards and
remove the wheel as shown in the figure (fig_a).
To remove the front wheels: press the tab as shown, and
remove the wheel (fig_b).
TRANSPORT: the stroller can be carried comfortably
locking the front wheels and grasping the main handle
(fig_c).
29• REMOVING THE LINING: to remove the stroller's lining:
- unthread the belt's leg divider from under the seat
(fig_a);
- slip the elastics off their hooks on both sides (fig_b);
30• - unscrew the belt on both sides, keeping your finger
under the bolt (fig_c);
- unfasten the lining from the armrests as shown in the
picture (fig_d);
- unfasten the soft cover from the seat (fig_e);
31• - on the back of the pushchair:
- remove the lining from the seat (fig_f);
- Unbutton the cover from both sides (fig_g);
- undo the buttons on both sides on the backrest (fig_h);
32• Unfasten and remove the shoulder straps from the
backrest as shown in the figure 18_a / 18_b;
- push in the openings and pull off the side lining.
Do this on both sides (fig_i);
- remove the lining from above (fig_l).
REPLACING THE LINING: to put the lining back on:
- fit the lining onto the backrest
- fit the lining over the platform
- attach the side elastics (26b)
- fasten the lining's hooks to the armrests (27d)
- fasten the lining's buttons to the chassis (27e)
- fasten the belt in the right position with the screwdriver
(27c)
- attach the leg divider under the seat. One part must be
above the seat and one below (26a)
- attach the belt at the desired height (point 18)
33• on the back of the stroller:
- insert the two rigid flaps between the tube and the seat
(fig_a);
- Button the cover back on, on both sides (Fig.b)
34• Button the lining onto the stroller's backrest (fig_c).
Insert the rigid strap into its grooves until it clicks into
place. Check it is securely fastened by pulling it (fig_d).
GANCIOMATIC SYSTEM
The Ganciomatic System is the quick practical system
that enables you to attach the Primo Viaggio (0+ group)
car seat to the stroller in just one step.
35• Before attaching the car seat, you must:
- insert the stroller's break;
- put the backrest into the lowest position (flat, fig_a);
- lift the soft cover as shown in the figure (fig_b);
- lift the Ganciomatic attachments from the chassis (fig_c);
- put the car seat in mum-facing position and push it
down until it clicks (fig_d);
- Check that the child transport system is properly
fastened.
- Lift the stroller backrest to the highest position.
- Important: do not remove the bumper bar from the
stroller when you attach the car seat (read point 21 to
see how to attach the bumper bar).
- To release the car seat, read the car seat's instruction
manual.
36• To lower the stroller's Ganciomatic fittings, move them
inwards and rotate them downwards.

SERIAL NUMBERS

37• The information on the BOOK stroller is under the seat
and includes: product name, production date and item
serial number.
This information is required if complaints are made.
ACCESSORIES
38• RAIN CANOPY: can be fastened to the hood (fig_a).
MOSQUITO NETTING: can be fastened to the hood (fig_b).
UMBRELLA: practical umbrella to match (fig_c).
39• BAG: diaper-changing bag with pad for changing baby's
diaper (fig_a).
CUP HOLDER: may be attached to the mushroom
button on the frame of the stroller (Fig. b).
VARIO FOOT MUFF: a warm, light and soft multi-
purpose foot muff. Can be used as a changing mat
and adjusted to 3 sizes (fig_c).
BABY CUSHION: for Peg Perego high chairs and
strollers. Winter side made with cozy matelassé jersey
and summer side made with 100% cotton (fig_d).

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this product
in a dry place.The maintenance have to be regularly.
CLEANING THE CHASSIS: periodically clean all plastic parts
with a damp cloth. Do not use solvent or similar cleaning
products; keep all metal parts dry to prevent rusting; keep
moving parts clean (adjustment mechanisms, locking
mechanisms, wheels, ...) and free of dust and sand and, if
necessary, lubricate with light machine oil.
CLEANING THE RAIN CANOPY: wash with a sponge and
soapy water; do not use detergents.
CLEANING FABRIC PARTS: brush fabric parts to remove
dust and wash by hand at a maximum temperature of
30°C; do not wring; do not use chlorine bleach, do not
iron; do not dry clean; do not apply solvent-based stain
removers and do not dry in a tumble dryer.
PEG-PÉREGO S.p.A.
Peg-Pérego S.p.A. is an ISO 9001
certified company. This certification is
a guarantee for customers and
consumers of the transparency and
trustworthiness of the company's
procedures and working methods. Peg
Pérego can make changes at any time to the
- 22 -