Product Description; Before First Use; Use And Operation - oneConcept 10028322 Anschluss- Und Anwendungshinweise

• Remove all packaging.
• Clean all the parts as described in the chapter CLEANING.
• Dry all the parts.
Which chocolate is suitable?
Use customary chocolate coating or special chocolate fountain chocolate from specialty stores sine it
is more pourable then conventional chocolate. Different grades are available.
When using conventional chocolate, vegetable oil must be added to ensure ease of flow.
Prepare foods for dipping
You can dip different fruits, depending on the season and your preference, into the melted chocolate.
You can also dip biscuits, marshmallows or the like. Use long wooden skewers or the like for dipping
the foods.
Other possible applications
Refine the chocolate, e.g. with liqueur. You can use cheese or barbecue sauces instead of chocolate.
Add vegetable oil to ensure ease of flow. For dipping, you can use, e.g. asparagus, sausages, grill
food.
1. Place the unit on a flat, stable surface.
2. Place the cascade tower (F) on the three pins in the container (A)
3. Insert the auger (G) with the triangular hole first into the cascade tower (F). Twist the auger (G)
until it engages with the driver shaft.
4. Unwind the mains cable completely.
5. Plug the supply cord into the wall socket.
6. The unit is now ready to use.
Operation
• Prepare your fondue mixture in a pot and pour it into the container (A). Do not overfill the container.
• Turn the switch (D) to position I. The heater works and keeps the mixture warm and liquid. The
control light is on. For some mixtures the heater is not needed.
• Turn the switch (D) to position II. The heater and motor works at same time. The control light is
on. After some time mixture is extruded out at the top of the cascade tower and flows back down
into the container over the cascades. If no mixture is extruded, the container must be refilled.
• If the unit is not exactly level, the mixture flows down only one side of the cascades. To make the
mixture flow down evenly to all sides, the unit should be set up exactly level with the two adjus-
table feet (H).

Product Description

Before First Use

Use and Operation

A Container
B Base Unit
D Switch
E Light Indicator
F Cascade Tower
G Auger
H Adjustable Feet
6