Errors; Technical Data - Schick Dental Q Basic Betriebsanleitung

9. Errors

If the handpiece is overloaded or blocked, the control unit switches off automatically to prevent further
damage. Make sure the tool can rotate freely in the handpiece and after releasing foot lever or knee
lever back to neutral position the unit can continue operation.
If an error cannot be removed following the above description, please contact an authorised service partner
or Schick directly.

10. Technical data

dimensions handpiece:
length:
diameter max.:
weight :
dimensions control unit:
width:
height:
depth:
weight:
operating voltage:
Frequency:
output:
speed range:
torque:
protection class:
The oscillation total value during operation is below 2,5 m/s² (EN 28662)².
158 mm
30 mm
240 g
knee version foot version
95 mm 155 mm
203 mm 75 mm
210 mm 220 mm
1.100 g 1.900 g
AC 100 - 240 Volt
50/60 Hz
80 Watt
1.000 - 40.000 rpm
max: 6,7 Ncm
II
table top version
155 mm
75 mm
155 mm
670 g
9