Switching On/Off - Schick Dental Q Basic Betriebsanleitung

5.2 Initial start up and installation
Connect the motorhandpiece to the ‚motorhandpiece' socket.
Plug the power supply to the power supply socket on the control unit. .
To switch on the device, the mains switch must be set to ‚ON'
foot switch (table top model)
.

5.3 Switching on/off:

The control unit is equipped with a mains switch to switch on / off the control mechanism.
Basically, first attach the handpiece before connecting the mains cable and switching the control
mechanism on.
Connection of the
5.4
In order to operate the
function, the mains cable of the
on the workplace suction device.
Possibly some corrections of the input sensitivity of the suction may be required. Suctions
of type ‚Freuding' must be set to "Schick CN".
.
control unit
motorhandpiece
serviceplug
for automatic swichting on of a workplace suction
together with a workplace suction system with automatic
must be connected to the appropriate connector socket
mains cable
6
mains switch
power supply
suction with automatic function