Switching The Operation Mode; Using The Light On/Off Function; Switching The Display Mode - Philips AC3829 Benutzerhandbuch

Switching the operation
mode
The appliance has two operation
modes, the purification ONLY mode and
the 2-in-1 mode.
• Touch the mode selection button
repeatedly to switch between
the purification ONLY mode and the
2-in-1 mode (fig t).
displays on the screen when
»
the appliance operates in the
purification ONLY mode.
» displays on the screen when
the appliance operates in the
2-in-1 mode.
Using the light on/off
function
With the light dimming button, you can
switch on or off the air quality light,
the display screen and the function
indicator if desired.
1
Touch the light dimming button
once, the air quality light will be
dimmed.
2
Touch the light dimming button
again, the air quality light and the
display panel will be turned off.
3
Touch the light dimming button
for the third time, all lights will be on
again.
EN
10
Switching the display
mode
The appliance has three display modes,
PM2.5 display, IAI display and humidity
level display.
PM2.5
AeraSense sensing technology
accurately detects and quickly respond
to even the slightest particle change in
the air. It provides you with reassurance
with real-time PM2.5 feedback.
IAI
The professional-grade AeraSense
sensor detects the level of indoor air
allergen and with numerical feedback
from 1 to 12 the potential risk level of
indoor air allergens can be displayed.
1 indicates best air quality.
Note
•
The appliance operates in IAI
display mode by default.
1
Touch and hold
switch to PM2.5 display (fig u).
» PM2.5 indicator and the actual
PM2.5 level display on the
screen.
2
Touch and hold
twice to switch to humidity level
display (fig v).
3
Touch and hold
switch to IAI display (fig w).
» IAI indicator and the actual IAI
level display on the screen.
for 3 seconds to
for 3 seconds
for 3 seconds to