Philips AC3033 Kurzanleitung

Mars DI Dach_EN
Connectivity
You need to connect your air puri er AC3033/AC3036 with
the App to control the puri er and check air quality.
Download and install
Air Matters App
Open the app and click 'Connect an Air Puri er or Monitor '
to connect your device. Please follow the steps in the app.
Control
Power Filter status/ Display
reset switch
IAI
PM2.5
Gas
Display
Auto mode Turbo mode
Wi-Fi Filter cleaning
indicator alert
Gas Indoor allergen PM2.5
indicator index indicator
Gas index Allergen index
from L1-L4, 1-12, 1 indicates
L1 indicates best air quality
best air quality
Mode Light
switch on/o
Auto
Turbo
Sleep
Sleep mode
Filter replacement
alert
3-digit display
Air quality
IAI / light
Gas / PM2.5
Good Fair Poor Very poor
Maintenance
1
2
NanoProtect lter Series 3 (FY3430/30)
2
When display shows
Time to clean the NanoProtect lter Series 3
When display shows
Time to replace the NanoProtect
lter Series 3
Press to check lter lifetime status.
!
Press for 3 seconds to reset after cleaning or replacing lter.
The lter may produce smell after being used for a while because of the
absorption of indoor air. Remove the lter and place it where it has direct
sunlight and ventilation for several hours. Re-install and try using it again.
If the odor remains, please replace the lter.
90x127mm
3000 038 71741-1