auna Connect Soundchef Anleitung Seite 55

Auto-update
• The time and date can be updated manually or automatically from DAB,
FM or network.
• Auto-update works with data sent over DAB, FM or the Internet. The
clock is only updated when in a corresponding mode, so it is best to
select a mode you use regularly.
• DAB and FM use time signals broadcast with radio transmissions.
• Network uses a time signal sent from the Internet radio portal when in
any network-connected mode.
Time zone, daylight
Set your time zone. If you country uses daylight saving and it is in effect,
turn on the Daylight savings option.
Manual update
• If you set No update, the wizard prompts you to set the time and date
manually. The date and time are displayed as dd-mm-yyyy and hh:mm.
• The active value appears as flashing. Adjust each value with the
NAVIGATE knob or </> on the remote control. Once the value is set,
press OK to continue setting with next value.
Network
Wlan region
Select the Wlan region to obtain the optimal Wlan connectivity: Most of
Europe.
Scanning for the network
• The kitchen radio is compatible with all common network protocols and
encryption methods. It searches for the available networks and list them
out for you choose.
• There will be hints for the type of network – if your network device
supports WPS function, it will be [WPS] before the SSID (the name of
network device). Select the one you want to connect.
• For the wireless connection, you will be asked for input encryption in
the next step.
EN
55