Light Replacement - Franke FSW 918 BK/XS Bedienungsanleitung Und Einrichtung

20 W halogen light.
• Extract the lamp from the lamp holder by pulling gently.
• Replace with another of the same type, making sure that the
two pins are properly inserted in the lamp holder socket holes.
REPLACING OF THE LED UNIT
LED
• To remove the lighting unit a screwdriver can be used in order
to slightly press the side part of the unit.
• Remove the unit, remove the electrical connector and replace
the unit with a new one. ("To purchase contact technical sup-
port")
Warning: This appliance is fitted with a white LED lamp classed
as 1M according to EN 60825-1: 1994 + A1:2002 + A2:2001
standards; maximum optical power emitted @439nm: 7µW. Do
not look directly at the light through optical devices (binoculars,
magnifying glasses...).
Cleaning the inside of the Hood
The inside of the hood must be cleaned regularly. To do this, pro-
ceed as follows:
• Open the Top Door (see USE).
• Open the Bottom Door by pulling it downwards with your
hands.
• Clean the inside of the Hood.
EN
Lighting

LIGHT REPLACEMENT

Lighting unit
2 24