Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
approx. 3 sec.
34
approx. 3 sec.
Operation
4.16 Childproof lock
The childproof lock serves the purpose of preventing children
from switching on the induction hob either accidentally or
intentionally. The controls are blocked here.
Switching on the childproof lock
1. Press the ON/OFF key of the hob (1 s.) until the power
setting 0 appears.
2. Immediately afterwards press the power setting display
and keep it pressed (for approx. 3 seconds) until the sen-
sor fi eld lights up from 0-P.
3. Immediately afterwards slide over the complete sensor
fi eld from 0-P to activate the the childproof lock. The power
setting indicators will show an L for child lock, the controls
will be disabled and the hob will switch off .
Switching off the childproof lock
4. Press the ON/OFF key.
5. Immediately afterwards press the power setting display
and keep it pressed (for approx. 3 seconds) until the sen-
sor fi eld lights up from 0-P.
6. Immediately afterwards slide over the complete sensor
fi eld from 0-P to deactivate the the childproof lock. The L
will go off .
Please note
•
In the event of a power cut the childproof lock will not be
cancelled.
4.17 Bridging function
The front and the rear cooking zones may be activated to-
gether for a cooking process (bridging function). This enables
larger cookware to be used.
1. Switch on the hob.
2. Press the two cooking zone selection keys of the front and
back cooking zones simultaneously to activate the bridging
function. The bridging function has been switched on and
the back power level setting shows the bridge
Operation is carried out with the front power level setting
and the sensor fi eld.
3. Activate the front and back cooking zones simultaneously
again or switch the hob off to deactivate the two power
level settings (as a key).
Please note
The roaster or the pot will need to cover at least half of the
cooking zones used in order to be recognised by the pan
recognition device!
GB
.
Werbung
Kapitel
Inhaltsverzeichnis
