Service And Maintenance - Kettler SIMBA Montageanleitung Und Handhabungshinweise

to braking and evading manoeuvres. Also avoid riding with one hand.
Ask the child to sit quietly. Sudden weight transfers by the child may considerably affect your safety during a
ride.
Pay attention that the child does not handle any objects (e.g. toys) which might get mingled with the whels. Clo-
thes or extremities of the child should never get into turning parts or into the brake and transmission system.
Protect your child from sharp edges at your bicycle, from worn cables and other parts that might lead to inju-
ries.
Before beginning a ride and during a tour check whether or not the child's seat is positioned firmly on the bicy-
cle; also check screwings and other connections for proper seat.
Only transport the child with the safety belt being fastened and the foot straps being closed. Have a check during
the breaks that those safety devices are still unopened.
Even if no child is carried, close the seat belt to avoid that it gets into turning parts or that it clings to parts that
are passed during riding.
Pay attention to a suitable and sufficiently warm clothing of your child.Children who are sitting still normale cool
down faster than the rider.
Do not park your bicycle before the child has left its seat.
We recommend that adult and child wear suitable helmets.
Adjust the headrest such that its upper edge matches the child's ear level.
In cases of doubt and any other question do not hesitate to contact your specialized dealer.
Never leave your child alone and unattended in its child's seat due it the danger of the bicycle falling over.

Service and maintenance

Always use environmentally friendly substances (never aggressive or etching ones) for the cleaning and service
of the child's seat for bicycles.
You can also clean safety belts, if required. In this case it is especially important not to use aggressive substances!
Usually a weak rinsing lye or suds.
Accessories
If you want to attach the seat to another bicycle, you can order a second carrier for the child's seat. (item no.
8947-633).
To secure the child's seat from theft, a cylinder lock can be inserted into the seat support bracket (see page 18).
The lock (type K.01.32.G1) is not supplied with the seat. The lock is obtainable from: Firma P.C. Fischer, Kai-
serstraße 126, D-58300 Wetter/Ruhr, tel. (0) 23 35/42 64, fax (0) 23 35/58 46
Note on Assembly
Assembly must be carried out carefully by an adult.
Carefully read these mounting instructions before beginning with the work itself. The individual steps are additio-
nally explained in the sequence of figures by means of symbols, in some cases a text mark indicates that a writ-
ten explanation is available. Strictly follow the individual mounting steps to ensure a safe use and operation of the
unit.
For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of tubing plugs).
List of spare parts page 19 and 20
When ordering spare parts, always state the full article number, spare-part number, the quantity required and the
inspection number stamped on the back.
The seat may only be ordered at an authorized dealer.
Example order: Art. no. 8947-950/spare-part no. 10122043/2 pieces/inspection no. ....................
keep original packaging of this article, so that it may be used for transport at a later date, if neces-
sary
Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.)
is required, this should be clearly stated on the order by adding the words „with fastening material".
Kettler (GB) Ltd. · Kettler House · Merse Road · North Moons Moat · Redditch · Worcestershire B98 9HL · Great Britain
Kettler International Inc. · 1355, London Bridge Road · USA-Virginia Beach, Virginia 23456
Please
5