Quax LINEA 54 03 54 Serie Bauanleitung Seite 40

LINEA
Quax
First dreams
®
First steps
Step 12 : Use the three support slats EB10 and three eccentrics C
Push an eccentric (C) in the drilling at the end of each bottom slat (EB10).
Step 13 : Use the parts AB7 of step 9, AB8 of step 10, AB9 of step 11
Push the drawer sides (AB9 LH and RH) on the wooden dowels of the drawer backs (AB8). Push the wood
screws (H) into the drillings of the sides and tighten into the sides. Push the drawer fronts (AB7) with their con-
nectors in the holes and over the wooden dowels of the sides. Tighten the eccentrics.
Step 14 : Use the parts of step 13, the support slats of step 12, three drawer bottoms EB11, twelve wood screws
F and six wood screws G
Push each drawer bottom (EB11) in the grooves of the sides and the fronts of the drawer. Attach each bottom
to the drawer back with the wood screws (F). Push the support slats (AB10) on the drawer front connector and
tighten the eccentric. Attach the support bars by means of the wood screws (G) to the drawer backs.
40
54 03 54xx
Commode met drie laden
Kommode mit drei Schubladen
and twelve wood screws H
Commode avec trois tiroirs
Chest of three drawers