Tools And Materials Required - Faro THIRA Handbuch

INSTRUCCIONES DE SEGURIDAD / INSTRUCTION DE SÉCURITÉ / SAFETY INSTRUCTIONS / INSTRUÇÕES DE SEGURANÇA / SICHERHEITSHINWEISE /
VEILIGHEIDSINSTURCTIES / INSTRUZIONI DI SICUREZZA / ΟΔΗΓΊΕΣ ΑΣΦΑΛΕΊΑΣ / ИНСТРУКЦИИ ПО ТЕХНИКЕ
CAUTIONS ENGLISH
Read entire booklet carefully before beginning installation and save these instructions.
To reduce the risk of personal injury, attach the fan directly to the support structure of the building according to these
instructions, and use only the hardware supplied.
To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the
outlet box and associated wall switch location.
All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, you should use a
qualified electrician.
To reduce the risk of personal injury, do not bend the blade attachment the system when installing, balancing or cleaning the
fan. Never insert foreign objects between rotating fan blades.
To reduce the risk of fire, electrical shock or motor damage, do not lift or carry the fan by the lead wires.
The fan blades cannot be installed lower than 2,3m from the floor.
NOTE:
The important precautions, safeguards and instructions appearing in this manual are not meant to cover all possible conditions and
situations that may occur. It must be understood that common sense, caution and carefulness are factors which cannot be built into
this product. These factors must be supplied by the person(s) installing, caring for and operating the unit.

TOOLS AND MATERIALS REQUIRED

• Screw driver.
• Blade screw driver.
• Wrench or pliers.
• Step ladder.
• Wire cutter.
• Wiring supplies as required by electrical code
UNPACKIING YOUR FAN
Unpack your fan and check the contents. Do not discard the carton. If warranty replacement or repair is ever necessary, the fan
should be returned in original packaging. Remove all parts and hardware. Do not lay motor housing
on its side- the decorative housing may become bent or damaged.
Thira – ref. 33128
faro
- 16