Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 Information | information
Please read the installation manual
before installing and using the system.
Faulty installation causes malfunction,
damages which may induce injury of
persons, who installing and using the
system.
Electrical installation only made by qualified
persons which are working based on DIN
VDE 105-100.
Install trunks only on specified positions.
Warranty and compensation claims only by
using right types of trunk.
Follow VDE 100-701 for installing control-
cabinets.
Coin-operators must be installed in
splash-water-protected areas.
Build in the cabinets in dry rooms.
Water temperature over 45°C skalds skin.
Pay attention to the process-sheet DVGW
W551!
Attend right water pressure to avoid
damages of system, malfunctions or water
damage.
Interrupt water supply before removing parts
of waterconduit
Factory provided time of Cold-Flush is set on
12 hours after last usage.
No warranty by producer for incorrect
usage and usage out of specified normal
operation.
Do not proof the cover panel with silicone
sealant. System contents a 3-ary protection
system and a whole for condensation and
leaking water.
Install modification sets at right sanitary
panel for wall recessing.
Please flush water conduit before and after
installing according to DIN EN 806-4.
Keep product dry and frost-protected.
Check property of wall before installation.
Use right stainless screws and wall
plugs.Duty of maintenance. Please follow
VDI/DVGW 6023 and DIN EN 806-5.
Notice DIN 1988-200 bzw. VDI/DVGW 6023
if water conduit temporarily stopped.
(seasonal usage)
Don't bin batteries into consumer waste.
Return batteries to official places of
collection.
1.2 references
4
Werbung
Inhaltsverzeichnis
