SHARPENING WEDGE
This log splitter is equipped with reinforced splitting wedge which blade is specially treated, after long
periods of operation, and when required; sharpen the wedge using a fine-toothed file removing any
burrs or flat spots on the edge.
TROUBLE SHOOTING
PROBLEM
Motor does not start
Log Splitter does not work
while motor running
Log Splitter works with abnor-
mal vibration and noise
WIRING DIAGRAM
PROBABLE CAUSE
No current in the socket
Electrical extension line
defective
Switch or capacitor defective
Valve is not opened owing to
the connection parts loosening
Control Levers or Connection
parts bent
Lower hydraulic oil level
Lower hydraulic oil level
PLUMBING DIAGRAM
34
REMEDY SUGGESTED
Check mains fuse
Unplug, Check and replace
Have checked by Electrician
Check and tighten the parts
Repair the bent parts
Check and refill hydraulic oil
Check and refill hydraulic oil