Delivering Log Splitter To Work Site; Log Splitter Operation - Mountfield LEVITA 6T Betriebsanleitung

Release
Bolt
Danger! Keep clear of moving
parts! To be operated by one person
only!
DELIVERYING LOG
SPLITTER TO WORK SITE
The log splitter is equipped with 2 wheels for
minor moving. To move the log splitter to the
work site. Grip the handle (A) to tilt the log
splitter slightly after making sure the oil tank
cover is tightened.
If using a crane, lay hoist
sling around the housing.
Never try to lift the log splitter
at the Handle (A).
LOG SPLITTER
OPERATION
1. Fix the machine using Bolts M10×30 on lever
ground before operation. Plan your work site.
Work safely and save effort by planning your
work before hand. Have your logs positio-
ned where they can be easily reached. Have
a site located to stack the split wood or load it
onto a nearby truck or other carrier.
2. Prepare the logs for splitting. This splitter
accommodates logs up to 102 cm in length.
When cutting up limbs and large sections,
do not cut sections any longer than 100cm.
With 3 support table positions for splitting for
56 cm, 81.5 cm 104.5 cm in length. Insert
the support table in position nearest the log
length, and secure the support table with the
locking hook.
Do not attempt to split green logs.
Dry, seasoned logs split much more
easily, and will not jam as frequently
as green wood.
3. To Apply a thin coat of grease to the surfaces
of the ram before operation will lengthen the
durability of the ram.
31