General Settings; Time Setting; Setting Alarm - Peaq PDR300 Bedienungsanleitung

ENGLISH
DELETING COUPLED DEVICES
1. Hold the select key depressed about 10
seconds.
2. All Bluetooth couplings will be separated.
Note
If you couple more than 8 devices, then the
first coupled devices are automatically sepa-
rated.
64
PDR300_IM_I_01.indb 64

General Settings

TIME SETTING

1. Press Menu and select <System Set-
tings> with Scroll.
2. Select <Time/Date>.
3. Press Scroll to confirm the selection.
4. Select the desired submenu with Scroll:
• Set 12/24 hour:
Selection between 12/24 hour format
• Set Time/Date:
Manual time and date setting
• Auto update:
Selection between update from DAB,
Network and No update
• Set date format:
Select between DD-MM-YYYY and
MM-DD-YYYY

SETTING ALARM

Alarm times 1 and 2 (Alarm 1 or Alarm 2)
1. Press on Alarm 1 or Alarm 2 to access
the alarm settings.
2. Select one of the two waking times in
order to save it:
Activating
Select how the alarm clock should be
switched on:
• Select off to deactivate the alarm.
• Select daily, once, weekend or week
days to activate the alarm.
Time
Set the time at which the alarm should be
set.
9/26/12 4:45 PM