Frequency Settings - Peaq PDR300 Bedienungsanleitung

Setting FM radio stations
1. Press Source or Menu to select FM ra-
dio stations.
2. The radio changes to the last selected
station.
FM
FM
87.50MHz
Note
When you switch on the radio for the first
time, it conducts an automatic search of FM
radio stations.

FREQUENCY SETTINGS

Set an FM radio station.
Manual frequency setting
Rotate Scroll/Select to change the frequen-
cy in 0.05 MHz steps.
Automatic frequency setting
Press Scan and the radio stops searching if
an active station is found.
PDR300_IM_I_01.indb 61
SAVING FM RADION STATIONS
You can save a maximum of 10 pre-set FM
radio stations.
1. Set the desired FM station.
2. Press and hold Preset and rotate Scroll
FM
3. Press Scroll to confirm the entry.
radio
4. The pre-set number of the saved station
FM RADIO STATION SELECTION
08 : 30
1. Press Source or Menu to select an FM
2. Press Preset to call up the pre-set menu.
3. Select a pre-set number with Scroll and
FM MENU
1. Press Menu in FM mode to access the
2. Rotate Scroll to scroll through the menu
3. Press Scroll to select an option.
4. Repeat steps 2 to 3 to select a suboption
to pre-set a number 1 - 10.
is shown.
radio station.
confirm the selection by pressing the
Scroll key.
FM menu.
options:
• [Scan setting] (Scan-function)
• [Audio setting] (Stereo)
within an option.
ENGLISH
61
9/26/12 4:45 PM