Installing The Mac Dedicated Software - Tascam US-2x2 Bedienungsanleitung

3. Double-click the "TASCAM_US- 2x2_US-4x4_
Installer_x.xx.exe" file in the folder that appears
after uncompression to automatically launch the
installation software.
4. When a "Security Warning" or "User Account
Control" screens appears, click the "Yes" button.
5. When the Setup Wizard screen appears, click the
"Next" button.
6. Read the contents of the License Agreement, and
select "I accept the agreement" if you agree to the
terms. Then, click the "Next" button.
7. Next, click the "Install" button.
8. Next, click the "Install" button to start installation.
The following screen appears when installation
has completed. Click the "Finish" button.
This quits the installer and launches the Windows
Settings Panel.
8
TASCAM US-2x2/US-4x4
NOTE
The first time you connect the unit by USB to the
computer after installing the software, installation
of the device driver will be executed. Some time
might be necessary before the unit is recognized
because Windows Update will be automatically
searched at this time. If the unit is still not recog-
nized after a while, open the software installation
screen from the notification area at the bottom
right of the computer display, and click "Skip
obtaining driver software from Windows Update"
to stop the search.

Installing the Mac dedicated software

NOTE
• Install the Mac dedicated software on the computer
before connecting the unit to it with the USB cable.
• Depending on the Gatekeeper setting, a warning
message might appear during installation. For
information about Gatekeeper, see "Note about
Gatekeeper" in "3–Installation" of the Reference
Manual.
8 Mac dedicated software installation
procedures
1. Download the latest Mac dedicated software for
the operating system you are using from the TEAC
Global Site (http://teac-global.com/) and save it
on the computer to be used with the unit.
2. Double-click "US-2x2_US-4x4 Installer.dmg", which
is the saved disk image file for the Mac dedicated
software, and double-click "US-2x2_US-4x4
Installer.pkg" inside the folder that opens.
NOTE
Depending on the computer's settings, the
downloaded zip file might not have been uncom-
pressed automatically. In this case, uncompress the
zip file first and then double-click the disk image
file.