Making Various Settings; Opening The Settings Panel; Making Settings On The Home Page (Windows Only); Making Settings On The Settings Page - Tascam US-2x2 Bedienungsanleitung

Making various settings

Opening the Settings Panel

8 Windows
From "All Apps" (All Programs), select "TASCAM US-2x2
& US-4x4 Settings Panel" under TASCAM.
The Windows Settings Panel has three pages. Click a
tab at the top of the Settings Panel to open that page.
Home : This page shows a variety of information
and allows the selection of presets suitable
for specific operations.
Settings: Make detailed settings for the US-2x2 or
US-4x4 on this page.
Custom: Make software mixer settings.
8 Mac
Select "TASCAM US-2x2 & US-4x4 Settings Panel" from
the Applications folder and launch it to open the Mac
Settings Panel on the computer display.
Making settings on the Home page
(Windows only)
The Operating Mode setting can be set on the Home
page of the Windows Settings Panel.
Windows Settings Panel Home page
"DAW"
Use this setting when using DAW software, as well
as when you do not need "BROADCAST/KARAOKE"
mode (for live broadcasting or karaoke applica-
tions).
"BROADCAST/KARAOKE"
Use this setting for live broadcasting, karaoke and
similar applications.
This preset enables the loopback function. It mixes
the sound output from the computer with the
sounds of mics input through the IN 1 and IN 2
jacks on the unit and sends the mix back to the
computer.
"TALKING"
Use this setting for voice calling and similar appli-
cations.
This preset disables the loopback function. The
sound output from the computer (including
received voices and music playing on the
computer) is not sent back to the computer.
"CUSTOM"
Use the settings made on the Custom page.

Making settings on the Settings page

(Windows)/Settings Panel (Mac)

Settings can be made on the Settings page of the
Windows Settings Panel or on the Mac Settings Panel.
Windows Settings Panel Settings page
Mac Settings Panel
1 Direct Monitor Settings IN 1-2
Set the monitoring signal for the IN1/IN2 jacks to
Mono or Stereo.
2 Direct Monitor Settings IN 3-4 (US-4x4 only)
Set the monitoring signal for the IN3/IN4 jacks to
Mono or Stereo.
3 Audio Input On/Off
Turn input on/off for each channel separately.
4 LINE OUT 1-2
Select the signals to be output from the LINE OUT
(BALANCED) 1/2 and PHONES ( 1 and
on US-4x4) jacks.
Options
Monitor Mix: The signals input from all the input
connectors and the signals sent from the computer
by USB are mixed by the mixer and output.
Computer Out 1-2: Only the signals sent from the
computer by USB are output.
Computer Out 3-4: Only the signals sent from the
computer by USB are output. (US-4x4 only)
2 jacks
TASCAM US-2x2/US-4x4
11