Oki B32APH Bedienungsanleitung Seite 129

6.4.2-Manual tuning of channels and
storing in the memory
6.4.2.1-If you already know the
channel number
SETUP
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
CHANGE
Press the MENU button. Move to
the SETUP menu by pressing the
down movement button in Main
Menu and confirm your selection
with OK button. Setup menu will
be displayed. Select the system
in which you would like to make
the search from the System tab.
Move into CHANNEL tab by
pressing the Down movement
button. Press OK on your remote
control to select "S" for cable channels
and "C" for channels received via the
antenna. Move onto the PROGRAM
NO tab and using the number buttons
enter the channel number in which you
would like to have the channel stored. If
the broadcast viewed on the screen is of
your desired quality, first move onto the
STORE tab with the down movement
button to store in the memory the
selection you have made and store the
channel by pressing the Left or Right
movement buttons. The prompt STORED
will be displayed briefly. The channel
will be stored according to the program
number of your choice. You can tune and
store in memory other channels the same
way. In the event that you wish to exit the
channel settings menu for any reason,
simply press the EXIT button.
BG
S06
0
P13
BACK
MENU
6.4.2.2-If you do not know the
channel number
Press the MENU button. Move to
the SETUP menu by pressing the
down movement button in Main
Menu and confirm your selection
with OK button. Setup menu will
be displayed. Select the system in
which you would like to make the
search from the System tab. Move
into CHANNEL tab by pressing
the Down movement button.
Press OK on your remote control
to select "S" for cable channels
and "C" for channels received via
the antenna. Select SEARCH tab
using the up/down movement buttons,
and scan the channels in ascending
order with Right movement button and
in descending order with Left movement
button. If the channel that is found is of
your liking, select the STORE tab. Then
store it in the memory by pressing the
Right or Left movement buttons. Repeat
the same procedure for other channels
by selecting the program number of your
choice from the PROGRAM NO tab. If
the channel you found is not of the desired
quality and requires Fine Tuning or if you
would like to rename the channel, refer to
the relevant sections.
6.4.3-Fine Tuning
If the channel you found is not of the
desired quality and requires Fine
Tuning, then select the FINE
TUNE tab by pressing the Down
movement button in the Setup
menu. Using the Left/Right
movement buttons on your remote
control, adjust the broadcast
displayed on the screen to your
desired quality. Under normal
circumstances, you will not require to use
the Fine Tune function. The AFC values of
your television will automatically adjust and
lock themselves to the channel. However,
you might need it in case the television
transmitters do not operate according to
the standards. To store in the memory, the
settings you have made, select the Store
tab and press the Right or Left movement
button.
15 I
GB