Performing The Initial Power-On Settings; Tv Controls - Oki B32APH Bedienungsanleitung

6

Performing the initial power-on settings

6.1-TV controls

6.1.1-Temporary on/off (STAND-BY)
When you press the red STAND-
BY button located on the upper
left hand side of your remote
control while your television is
switched on, the sound and the
picture will go off. In the stand-
by mode, the power indicator of
your television will glow brighter.
To switch your television back on,
either press any numeric button or PR+/
PR- buttons.
Caution! If you are not going to use your
television for a long time, unplug its power
cable from the socket.
6.1.2-Channel Selection
You may enter whichever
program number you would like
by pressing the PR+/PR- buttons
located on your television and
your remote control. To select the
programs that are above 9, you
can use the Numerical buttons.
You may enter the number of the
program you would like to select
using the numerical buttons. For
example, to switch to the program
number 12, press respectively the
numeric buttons 1 and 2 on your
remote control. You can perform
the program selection also from the
Program Table. (See page 11)
6.1.3-Digital TV, Analog TV and AV
Mode Selection
Press the AV button on your
remote control. SOURCE menu
will be displayed. Select DIGITAL
TV (DTV), ANALOG TV (ATV) or
desired AV mode from the Setup
menu with Up/Down movement
buttons and confirm with OK
button so that your television will
switch to the source you have
selected.
6.1.4-Performing the Volume setting
You can adjust the volume of your
television by using the VOL+/VOL-
buttons on your remote control.
6.1.5-Temporary sound mute (MUTE)
To temporarily mute the sound of
your television, press the MUTE
button on your remote control. In
that case, MUTE symbol will appear
on the screen. When you press the
same button a second time, the sound will
be restored. If you press the VOL+ button
while in the Mute mode, the sound level is
increased and the Mute function is aborted.
6.1.6-Returning to Selected Program
(SWAP)
Allows you to switch between the
current program you watch and
the last selected program. For
example, if you change the channel
to Program 11 while you were watching
Program 1, press SWAP button to switch
back to Program 1. Press SWAP button to
switch back to Program 11 again.
PR 01
6.1.7-Main Menu
Press the MENU button. The Menu
including all the setting menus will
appear on the screen. Navigate
through the Menu titles with the
Up/Down movement buttons and
press the OK button to select the
desired menu. If you want to exit
the menu in any step, just press the EXIT
button. Press BACK or MENU buttons to
return to the previous Menu while you are in
a sub menu.
MAIN MENU
SOUND
PICTURE
PROGRAM TABLE
SETUP
FEATURES
9 I
GB
PR 11
PR 01
MENU
SELECT
EXIT