Language Settings; Time Settings; Signal Information - Oki B32APH Bedienungsanleitung

Some broadcasting enterprises, on the
other hand, do not give any program
information at all.
6.3.5-Digital Features
To enter digital features menu, select
FEATURES tab from the main menu
by using Up/Down movement buttons.
Select DIGITAL FEATURES tab from
IDTV FUNCTIONS

Language Settings

Time Settings

Parental Control
CA - Module

Signal Information

Software Update
Version
Select and Open
FEATURES menu by using Up/Down
movement buttons and press OK button
to confirm. DIGITAL FEATURES menu
will be displayed.
You can select the menu headings with
Up/Down movement buttons to make
settings.
6.3.5.1-Language Settings
You can select subtitle and
sound language provided that
the broadcast is supported for
all digital broadcasting channels.
Unless you make any selection,
the language supported by the
broadcaster will be selected
automatically.
To perform language selection,
select Subtitle and Teletext
Language, Subtitle Language
2 Audio Language or Audio Language
2 from the Language Settings menu by
using Up/Down movement buttons and
make your language selection with Left/
Right movement buttons. You can also
select subtitles directly by SUBT button
on your remote control or make sound
selection by AUDIO button.
6.3.5.2-Time Settings
To perform the time settings, select Time
Adjustment tab from the Time Settings
menu by usingUp/Down movement
No CA-Module
1.1.1
Back
Exit
TIME SETTINGS
Time Adjustment
Time Zone
Daylight Saving
Select and Activate
buttons and make your selection by using
Right/Left movement buttons. If you set
the Time Adjustment tab to Manuel ,
Time Zone, Daylight Saving tabs will be
activated. If you set it to Automatic, these
options will be deactivated.
6.3.5.3-Parental Control
You can restrict viewing some programs
with this feature. If the program to be
broadcasted is over the age restriction you
entered, the channel will not be displayed
and a password screen will appear. To
view the program, correct password must
be entered.
You can set the restriction by selecting
one of the Youth, Adult, Child, None
options from the Parental Rating tab while
the Parental Control tab is set to On.
In the Change PIN tab, the first PIN is
entered, then the new OSD is displayed
where the new PIN is entered and
confirmed by entering once again.
Note 1: The password for this feature
has been set as 0000 at the factory. You
can change the password as you wish
under Change PIN item in the Parental
Control menu.
6.3.5.4-CA-Module
In this menu, you can get information
about and make the relevant settings for
the CI Module that you can attach to your
television.
6.3.5.5-Signal Information
This menu gives information about
Channel, Frequency and Signal level and
quality.
13 I
GB
Automatic
+2.00
Yes
Back
Exit