Software Update; Performing Analog Tunings - Oki B32APH Bedienungsanleitung

6.3.5.6-Software Update

Auto update feature can be set to on
or off. When the new software title is
selected, the new transmitted broadcast is
searched by means of the OAD method.
6.3.5.7-Version
Version information is displayed at the end
of the line.
6.4-Performing Analog
Tunings
You can either tune the Analog channels
automatically or manually and store them
in your television.
6.4.1-Automatic tuning of channels
and storing in the memory
Note: If your television does not receive
any antenna broadcast for a period of 5
minutes, it automatically switches to the
stand-by position. The countdown OSD is
displayed on the screen during the last 1
minute (applicable for Analog mode only)
You can tune the programs automatically
with the Autoprogram function of your
television and then sort the channels
as you desire by means of the Program
Table. Press AV button on your remote
control, select TV tab from the SOURCE
menu by using Up/Down movement
buttons and confirm by pressing the OK
button. Your TV will switch to Analog
mode. Press the MENU button on your
remote control. Select SETUP by pressing
the down movement button and confirm
your selection with OK button. Setup
menu is displayed.
SETUP
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
SELECT
BG
S06
0
P13
BACK
MENU
Select PROGRAM NO tab by pressing
the Up/Down movement buttons in Setup
menu, enter the channel number to be
searched and stored automatically, then
select AUTOPROGRAM tab by using the
Up/Down movement buttons and press
OK button; Country Selection menu will
be displayed.
In the Country Selection menu, select
COUNTRY SELECTION
BELGIUM
CZECH REP.
DANMARK
DEUTSCHLAND
ELLADA
ESPANA
FRANCE
HUNGARY
IRELAND
ITALIA
the country, whose broadcast you would
like to watch in priority, by pressing the
right/left movement buttons and start
autoprogramming by pressing the OK
button. The channels will be automatically
searched and those found will be stored
in memory starting from the program
selected in the SETUP menu. At the
same moment, the Autoprogram menu
will be displayed and a marker indicating
the progress of the autoprogramming will
appear as shown below.
AUTOPROGRAM
SEARCHING
To stop the process at any given time,
please press the MENU button. The
Program Table, which will allow you to sort
the channels as you wish, will be displayed
after the automatic search is complete.
14 I
GB
NETHERLANDS
NORGE
ÖSTERREICH
POLSKA
SCHWEIZ
SUOMI
SVERIGE
TÜRKİYE
U.K.
..........................
START AUTOPROGRAMMING
% 20
STOP
MENU