Safety Information; Proper Installation And Placement - Franke FH FS 785 4G Bedienungsanleitung

safeTy InformaTIon

Read the operating instructions before using the
Z X
appliance for the first time.
The manufacturer can not be made liable for
possible damage which may occur due to incorrect
installation and incorrect, improper or unreasonable
use of the device.
To ensure safe and efficient operation of this
electrical device:
Only contact authorised service centres.
Z X
Do not modify any features of the device.
Z X
Children of 8 years or older and persons with
restricted physical, sensory or mental abilities, or
with limited experience or knowledge, may not use
or clean the device, except when they are supervised
and instructed by a person responsible for their
safety.
Children under 8 years may not use or clean the
device even if supervised. Keep children under
8 years away from the device unless constantly
supervised.
This device is not a toy.
Keep children away from the device and the
Z X
packaging material.
Do not leave children near the device unattended.
Z X
Do not let children play with the device.
Z X
Do not allow children to touch the device or its
Z X
controls during and immediately after using it,
since the hob becomes very hot.
Do not allow children to touch an unused device.
Z X
Make any potentially hazardous parts safe.

Proper installation and placement

The appliance must be installed and connected
to the electricity supply in accordance with the
separate installation instructions. Have a qualified
fitter/ electrician carry out the necessary work.
The appliance is designed for use in the home
for preparing food. No liability is assumed for
any damage caused by improper use or incorrect
handling.
If the appliance is to be permanently connected to
the power supply:
Ensure that the device is installed only by the
Z X
customer service, an electrician or trained
FH FS 785 4G / FH FS 584 4G
personnel with the appropriate knowledge/
education.
This appliance is not connected to a fume
Z X
extraction device and must be installed and
connected in compliance with the current
regulations
Ensure that the device is installed in a way that
Z X
allows to disconnect it from the power supply,
with a contact opening distance that ensures
complete disconnection in category III overvoltage
conditions.
Ensure that the appliance is connected to an
Z X
earthing system in compliance with the current
regulations.
Ensure that the device is connected directly to the
Z X
mains socket.
– Ensure that no adapters, no multi-sockets and
no extension cables are used to connect the
device.
Ensure that the supply cord is not damaged. If
Z X
damaged, contact customer services.
Ensure that the device is not exposed to
Z X
atmospheric agents (rain, sun).
Ensure that the ventilation of the appliance is in
Z X
accordance with the manufacturer's instructions.
Ensure the gas type and supply is compatible with
Z X
appliance specifications.
– The type of gas for which the appliance is
arranged is specified on the dataplate on the
bottom of the tray.
Pay particular attention to the applicable
Z X
regulations on ventilation.
The use of a gas cooking appliance produces heat
Z X
and humidity in the room where it is installed.
– Ensure the room is adequately ventilated: keep
natural ventilation openings open, or install a
mechanical ventilation device (extractor hood
with exhaust duct).
Risk of death!
Keep pets away from the device.
Z X
Packaging materials, e.g. plastic film and
polystyrene, can be dangerous for children.
Keep packaging material away from children.
Z X
– 5 –
EN