Ceado E37S Bedienungs- Und Wartungsanleitung Seite 30

30
To change the operating mode of the start button, press the button
screen is displayed:
Press to confirm. The display will show:
Press the button
Leaving the settings menu
To leave the settings menu and return to READY status, press the button
screen is displayed:
Press the button
FILTER-HOLDER SUPPORT
To install the filter-holder support (optional) insert it
in the two support pins (see 8 Fig. 1) and tighten the
two socket-head screws on the bottom of the
support (1 Fig. 6) until it is secured.
Note: Take care that the support is positioned
completely in contact with the body.
Slacken the two socket-head screws on the top
(2 Fig. 6), position the filter-holder on the support
and adjust the height of the top in such a way as to
keep the holder horizontal, then tighten the two
screws to maintain the desired position.
Set
start button
Use buttons + -
pulse OFF
or to set the function ON or OFF.
Exit
to confirm.
GB
five times until this
six times until this
2
1
Fig. 6