Important Notes - Clearaudio Cocept Bedienungsanleitung

6.)
concept
If your turntable is not in a perfectly level position,
as indicated by the bubble of the level gauge not being
positioned in the centre of the black circle, you can adjust
the turntable's feet by turning them clockwise or anti-clock-
wise until you reach a perfectly level position. You can then
lock in the ideal position of the spikes using the lock screw.
You will only get the best sound from your
if the turntable is in a perfectly level position.
7.)
Connect one end of the external power supply provided to
the socket on the rear of the
other end to a live AC outlet. Then connect the tonearm
cable to your phonostage.
concept
Your turntale is now fully set up and ready to play.
We wish yo a lot of listening pleasure!

4. Important notes

Adjustment of the tracking force
Never check or adjust the tracking force when there is a record on the platter. Always remove the record first.
The pre-adjusted and recommended tracking for the Clearaudio
concept
Clearaudio MC cartridge 2.2 g (+/- 0.2 g).
Adjustment of the tonearm height
As everything on the turntable is pre-assembled and tested,
including tonearm and cartridge, there is usually no need to
change any parameters on the
to change the height of your tonearm please refer to your
nearest qualified dealer or service personnel.
Your dealer can make the height adjustment by loosening the locking screw on the side of the tonearm base
of your turntable.
Clearaudio assumes no liability for incorrect handling or any damage caused, if non qualified persons
attempt these adjustments.
concept
turntable
concept
turntable, and the
concept
turntable. If you want
6
concept
to 6.)
to 6.)
to 7.)
concept
MM cartridge and for the
pic. to no. 4
Lock screw