Setup - Clearaudio Cocept Bedienungsanleitung

3. Setup

concept
Setting up the turntable is easy. The turntable chassis, tonearm an cartridge are already assembled
and all key parameters have been pre-adjusted and tested at the Clearaudio factory.
concept
The turntable requires a place for set-up location of at least 17 inch x 14 inch.
1.)
concept
First take the turntable chassis out of the package
and place it on a suitable surface.
Then remove the drive belt from the plastic bag.
2.)
Place the drive belt around the sub-platter and around the
motor pulley.
3.)
Take the platter out of the package and carefully place it
with both hands onto the shaft.
4.)
Carefully remove the adhesive security tape and further
security materials from the tonearm and the cartridge.
5.)
As all key parameters have been adjusted at the
Clearaudio factory, all you need to do is to level the
turntable using the level gauge provided.
to 1.)
to 3.)
to 4.)
to 5.)
5
concept