(Sj-Xe680M, Sj-Xe700M); Control Panel; Door Alarm - Sharp SJ-XP680G Bedienungsanleitung

Control panel

Operations of useful modes
Extra cool
Press the mode button.
(Beep)
Express
Press the mode button.
(Beep)
freezing
Express cool
Press the mode button for
3 seconds or more.
(Beep, Beep, Beep)

Door Alarm

• When the refrigerator door is left open for over 1 minute, door alarm sounds once, and again after 1 minute.
• If the door is left open for approx. 3 minutes, the alarm sounds continuously.
• The alarm stops after close the door.
If Door alarm does not stop
If the door alarm does not stop after closing all doors, it is a defect.
Contact the SHARP service center for service.
Method of stopping the door alarm temporarily
• Press "R" button and "F" button simultaneously and continuously for 3 seconds or more.
• The door alarm sounds again after approximately 2 days.
12
(SJ-XE680M, SJ-XE700M )
Useful modes
Button Meaning
Extra cool
Express freezing
Express cool
Plasmacluster
Controlling temperature
Button Meaning
Controlling
temperature
of Refrigerator
compartment
Controlling
temperature of
Freezer compartment
Start operation
Lighting
Lighting
Flashing
Default setting
OFF
ON *
Default setting
(Except for "Plasmacluster")
Cancel operation
Press the mode button.
(Beep)
Press the mode button.
(Beep)
Press the mode button.
(Beep)
* The Plasmacluster operates
automatically when the refrigerator
is powered on.
There is no need to switch on/off.
Note
• If you want to light up the
indicator, press "F" or "R" button.
Turn off
Turn off
Turn off
Beep beep beep