Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Maintenance - Klarstein 10030013 Handbuch

Vorschau ausblenden Andere Handbücher für 10030013:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Selecting the temperature
You can choose the desired temperature in the compartment, using the
selected increases/decreases by 1 °C with each button press.
This appliance' s technical performances allow to reach a temperature range from:
• from 8 °C to 18 °C for the upper compartment
• from 11 °C to 18 °C for the lower compartment
In the event of a power cut, all previously selected temperatures settings will be deleted and each compart-
ment will re-initialise to the factory-preset temperature of 12 °C.
• The interior light may be switched on or off using the
• Finally, pressing the
Note:
• After you setting the temperature, the display will return to show the temperature in the cooler, but it could
turn to the point that you have set gradually.
Caution
• In order to function at its potential, this appliance needs to be placed on flat floor, with 2cm spaces at each
side and 10cm at the backside.
• Use the adjustable (iron case) to place the cooler fully horizontal.
• Avoid direct sunshine and carry high temperature.
• Hot food should be cooled down before placing in the cooler. Do not mix uncooked food with cooked
food.
• Do not place heavy articles on the top of the cooler.
• Before cleaning your appliance (something that should be done regularly), disconnect it by removing the
plug or pulling the fuse on the circuit.
• Before using your appliance for the fist time and regularly after that, we recommend that you clean the
inside and outside (front, sides and top) with warm water mixed with a gentle cleaning product. Rinse with
clean water and allow to dry before reconnecting. Do not use solvents or abrasives.
• In the event of a pronounced plastic smell, clean the appliance with a mixture of two tablespoons of bicar-
bonate of soda, mixed in a 1/4 litre of lukewarm water.
• When the appliance is switched on for the first time, there may be a residual odour. In that case, run the
appliance empty for a few hours at the coldest possible temperature. The cold will kill any odours.
11

Operation

button switches the temperature display between Celsius and Fahrenheit.

Maintenance

/
buttons. The temperature
button.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis