General; Delivery, Packaging, Recycling - Olsberg 14/513 Anleitung

General

Please read this instruction carefully. It contains im-
portant information on safety, installation, use and
maintenance of the heater.
The manufacturer cannot be held responsible for
problems occurring when the following instructions are
not adhered to. The appliances must only be used for
the function intended.

Delivery, Packaging, Recycling

To facilitate transport and handling, the heater cabinet
(with built-in heating elements) and the bricks are
packaged separately.
The packaging of your high-quality Olsberg Appliance
has been limited to the minimum necessary for safe
transport and is made entirely of recyclable materials.
The packaging and heater parts have been marked
according to present requirements and/or possibilities
to allow the best possible disposal or recycling at a
future date.
Note: Packaging materials, replacement parts
and heaters or heater parts to be scrapped
must all be disposed of correctly according
to regulations.
Disposal of old heaters
Old electric and electronic devices often
contain valuable materials. But they may
also contain harmful ingredients which
were necessary for their function and secu-
rity. In normal waste disposal or incorrect
treatment they could be harmful to the en-
vironment. Please help to protect our envi-
ronment! Please do not add your old
heater to normal waste in any case. Dis-
pose of your old heater according to the
local regulations.
21