Operation - STEINEL IR Quattro Bedienungsanleitung

Operating Instructions
GB
Dear Customer,
Congratulations on purchas- Please familiarise yourself with
ing your new STEINEL pres- these instructions before at-
ence detector and thank you tempting to install the pres-
for the confidence you have ence detector because pro-
shown in us. You have chosen longed, reliable and trouble-
a high-quality product that has free operation will only be en-
been manufactured, tested sured if it is fitted and used
and packed with the greatest properly.
care.
Safety Precautions
personal injury or damage
í The presence detector
to property.
must only be installed by a
í This product must never be
qualified electrician in ac-
connected to a 230 V AC
cordance with national
power supply as it is in-
wiring regulations as de-
tended for connection to
fined in VDE 08 29
an extra-low voltage power
(DIN EN 5000 90).
í Installed improperly, low- supply.
voltage products can
cause extremely serious
System Components
Sensor module Surface-mounting adapter
Metal frame Catch mechanism
Sensor base Reach setting
k
4. Kaiser stud-wall junction Programming button
1
box, optional Installation and wiring
k
4. 2 clamping-type ceiling
adapter UP Box
Installation / Wiring
The sensor is only suitable
for recessed ceiling installa-
tion indoors. A clamping-type
ceiling adapter or surface-
mounting adapter is not
included.
PC PRO KNX_Zentraleuropa.indd 14-15 PC PRO KNX_Zentraleuropa.indd 14-15
We hope your new STEINEL
sensor will bring you lasting
pleasure.
Shrouds for minimising
the detection zone
(HF 360 KNX).
- 14 -
Accessories
Kaiser junction box for stud Guard cage
walls EAN no.: 4007841003036
EAN No.: 4007841 000370 RC6 KNX service remote
Clamping-type ceiling adapter control
EAN No. 4007841 002855 EAN no.: 4007841 593018
Surface-mounting adapter User remote control
AP Box KNX RC7 KNX
EAN no.: 4007841 003029 EAN no.: 4007841 592912
How it Works / Basic Function
The infrared and HF presence Using modern, high-frequency
detectors from the Control technology, the HF 360 guar-
PRO range control lighting as antees detection of movement
well as HVAC, e.g. in offices, absolutely anywhere irrespec-
schools, public buildings or at tive of radiated temperature.
home, in relation to ambient
light level and the presence of Sensing movement in two di-
persons. rections, the DUAL HF-sensor
is ideal for corridors in hotels,
The IR Quattro with highly ad- schools and office buildings.
vanced lens provides a square
detection zone, as the typical Presence Control has a low in-
shape of a room, in which the trinsic power consumption.
smallest of movements are
sensed.

Operation

Note: To calibrate the pres- 2. Load the Physical Address
ence detector, please go to and Calibration Program
www.knx.steinel.de into the presence detector.
When you are prompted to
1. Issue Physical address press the programming
and generate calibration button (8).
programme in the ETS.
í Presence detection
í Controlling lighting with
brightness control
í HVAC control
The function to be used (acti-
vated) is defined by the "Gen-
eral Settings" parameter win-
dow using the ETS3.f version
of the Engineering Tool Soft-
ware (ETS) and higher.
3. The blue LED goes out
once programming has
been successfully com-
pleted.
- 15 -
21.06.13 13:09 21.06.13 13:09